* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support @ 2013-04-26 8:02 Kuo-Jung Su 2013-05-21 17:10 ` Jagan Teki 2013-05-24 1:09 ` [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su 0 siblings, 2 replies; 10+ messages in thread From: Kuo-Jung Su @ 2013-04-26 8:02 UTC (permalink / raw) To: u-boot From: Kuo-Jung Su <dantesu@faraday-tech.com> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> --- drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index 2716209..2a27837 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { { + .id = 0x2014, + .nr_blocks = 16, + .name = "W25P80", + }, + { + .id = 0x2015, + .nr_blocks = 32, + .name = "W25P16", + }, + { + .id = 0x2016, + .nr_blocks = 64, + .name = "W25P32", + }, + { .id = 0x3013, .nr_blocks = 8, .name = "W25X40", @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) } flash->page_size = 256; - flash->sector_size = 4096; + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; flash->size = 4096 * 16 * params->nr_blocks; return flash; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-04-26 8:02 [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su @ 2013-05-21 17:10 ` Jagan Teki 2013-05-22 1:01 ` Kuo-Jung Su 2013-05-24 1:09 ` [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su 1 sibling, 1 reply; 10+ messages in thread From: Jagan Teki @ 2013-05-21 17:10 UTC (permalink / raw) To: u-boot Hi, I have a simple question like these parts are legacy flashes i guess. Could you please tell me on which boards these were used? Thanks, Jagan. On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: > From: Kuo-Jung Su <dantesu@faraday-tech.com> > > Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> > --- > drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c > index 2716209..2a27837 100644 > --- a/drivers/mtd/spi/winbond.c > +++ b/drivers/mtd/spi/winbond.c > @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { > > static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { > { > + .id = 0x2014, > + .nr_blocks = 16, > + .name = "W25P80", > + }, > + { > + .id = 0x2015, > + .nr_blocks = 32, > + .name = "W25P16", > + }, > + { > + .id = 0x2016, > + .nr_blocks = 64, > + .name = "W25P32", > + }, > + { > .id = 0x3013, > .nr_blocks = 8, > .name = "W25X40", > @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) > } > > flash->page_size = 256; > - flash->sector_size = 4096; > + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; > flash->size = 4096 * 16 * params->nr_blocks; > > return flash; > -- > 1.7.9.5 > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-05-21 17:10 ` Jagan Teki @ 2013-05-22 1:01 ` Kuo-Jung Su 2013-05-23 8:27 ` Jagan Teki 0 siblings, 1 reply; 10+ messages in thread From: Kuo-Jung Su @ 2013-05-22 1:01 UTC (permalink / raw) To: u-boot 2013/5/22 Jagan Teki <jagannadh.teki@gmail.com>: > Hi, > > I have a simple question like these parts are legacy flashes i guess. > Could you please tell me on which boards these were used? > It's used on Faraday A369 evaluation board. However the u-boot source codes for A369 is still waiting for approval. Here is the link to u-boot patchwork: http://patchwork.ozlabs.org/patch/242006/ > Thanks, > Jagan. > > On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >> From: Kuo-Jung Su <dantesu@faraday-tech.com> >> >> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> >> --- >> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >> 1 file changed, 16 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >> index 2716209..2a27837 100644 >> --- a/drivers/mtd/spi/winbond.c >> +++ b/drivers/mtd/spi/winbond.c >> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >> >> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { >> { >> + .id = 0x2014, >> + .nr_blocks = 16, >> + .name = "W25P80", >> + }, >> + { >> + .id = 0x2015, >> + .nr_blocks = 32, >> + .name = "W25P16", >> + }, >> + { >> + .id = 0x2016, >> + .nr_blocks = 64, >> + .name = "W25P32", >> + }, >> + { >> .id = 0x3013, >> .nr_blocks = 8, >> .name = "W25X40", >> @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) >> } >> >> flash->page_size = 256; >> - flash->sector_size = 4096; >> + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; >> flash->size = 4096 * 16 * params->nr_blocks; >> >> return flash; >> -- >> 1.7.9.5 >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot at lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot -- Best wishes, Kuo-Jung Su ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-05-22 1:01 ` Kuo-Jung Su @ 2013-05-23 8:27 ` Jagan Teki 2013-05-23 9:54 ` Kuo-Jung Su 0 siblings, 1 reply; 10+ messages in thread From: Jagan Teki @ 2013-05-23 8:27 UTC (permalink / raw) To: u-boot Hi, On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <dantesu@gmail.com> wrote: > 2013/5/22 Jagan Teki <jagannadh.teki@gmail.com>: >> Hi, >> >> I have a simple question like these parts are legacy flashes i guess. >> Could you please tell me on which boards these were used? >> > > It's used on Faraday A369 evaluation board. > However the u-boot source codes for A369 is still waiting for approval. > Here is the link to u-boot patchwork: Ok, Thanks for your information. > > http://patchwork.ozlabs.org/patch/242006/ > >> Thanks, >> Jagan. >> >> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>> From: Kuo-Jung Su <dantesu@faraday-tech.com> >>> >>> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> >>> --- >>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>> 1 file changed, 16 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>> index 2716209..2a27837 100644 >>> --- a/drivers/mtd/spi/winbond.c >>> +++ b/drivers/mtd/spi/winbond.c >>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>> >>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { >>> { >>> + .id = 0x2014, >>> + .nr_blocks = 16, >>> + .name = "W25P80", W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? ofcourse, I have seen the same on datasheet as well. Thanks, Jagan. >>> + }, >>> + { >>> + .id = 0x2015, >>> + .nr_blocks = 32, >>> + .name = "W25P16", >>> + }, >>> + { >>> + .id = 0x2016, >>> + .nr_blocks = 64, >>> + .name = "W25P32", >>> + }, >>> + { >>> .id = 0x3013, >>> .nr_blocks = 8, >>> .name = "W25X40", >>> @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) >>> } >>> >>> flash->page_size = 256; >>> - flash->sector_size = 4096; >>> + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; >>> flash->size = 4096 * 16 * params->nr_blocks; >>> >>> return flash; >>> -- >>> 1.7.9.5 >>> >>> _______________________________________________ >>> U-Boot mailing list >>> U-Boot at lists.denx.de >>> http://lists.denx.de/mailman/listinfo/u-boot > > > > -- > Best wishes, > Kuo-Jung Su ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-05-23 8:27 ` Jagan Teki @ 2013-05-23 9:54 ` Kuo-Jung Su 2013-05-23 10:44 ` Jagan Teki 0 siblings, 1 reply; 10+ messages in thread From: Kuo-Jung Su @ 2013-05-23 9:54 UTC (permalink / raw) To: u-boot 2013/5/23 Jagan Teki <jagannadh.teki@gmail.com>: > Hi, > > On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <dantesu@gmail.com> wrote: >> 2013/5/22 Jagan Teki <jagannadh.teki@gmail.com>: >>> Hi, >>> >>> I have a simple question like these parts are legacy flashes i guess. >>> Could you please tell me on which boards these were used? >>> >> >> It's used on Faraday A369 evaluation board. >> However the u-boot source codes for A369 is still waiting for approval. >> Here is the link to u-boot patchwork: > > Ok, Thanks for your information. > >> >> http://patchwork.ozlabs.org/patch/242006/ >> >>> Thanks, >>> Jagan. >>> >>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>>> From: Kuo-Jung Su <dantesu@faraday-tech.com> >>>> >>>> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> >>>> --- >>>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>>> index 2716209..2a27837 100644 >>>> --- a/drivers/mtd/spi/winbond.c >>>> +++ b/drivers/mtd/spi/winbond.c >>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>>> >>>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { >>>> { >>>> + .id = 0x2014, >>>> + .nr_blocks = 16, >>>> + .name = "W25P80", > > W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? > ofcourse, I have seen the same on datasheet as well. > It's W25P80. They are formally NexFlash NX25P80, NX25P16 and NX25P32. I've google for the W25P08, it looks like that Windond did have some legacy small SPI flash: W25P01, W25P02 .. W25P16. I guess it's a different production line... BTW I don't have these chips and corresponding datasheet, too. > Thanks, > Jagan. > >>>> + }, >>>> + { >>>> + .id = 0x2015, >>>> + .nr_blocks = 32, >>>> + .name = "W25P16", >>>> + }, >>>> + { >>>> + .id = 0x2016, >>>> + .nr_blocks = 64, >>>> + .name = "W25P32", >>>> + }, >>>> + { >>>> .id = 0x3013, >>>> .nr_blocks = 8, >>>> .name = "W25X40", >>>> @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) >>>> } >>>> >>>> flash->page_size = 256; >>>> - flash->sector_size = 4096; >>>> + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; >>>> flash->size = 4096 * 16 * params->nr_blocks; >>>> >>>> return flash; >>>> -- >>>> 1.7.9.5 >>>> >>>> _______________________________________________ >>>> U-Boot mailing list >>>> U-Boot at lists.denx.de >>>> http://lists.denx.de/mailman/listinfo/u-boot >> >> >> >> -- >> Best wishes, >> Kuo-Jung Su -- Best wishes, Kuo-Jung Su ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-05-23 9:54 ` Kuo-Jung Su @ 2013-05-23 10:44 ` Jagan Teki 2013-05-24 0:57 ` Kuo-Jung Su 0 siblings, 1 reply; 10+ messages in thread From: Jagan Teki @ 2013-05-23 10:44 UTC (permalink / raw) To: u-boot On Thu, May 23, 2013 at 3:24 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: > 2013/5/23 Jagan Teki <jagannadh.teki@gmail.com>: >> Hi, >> >> On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>> 2013/5/22 Jagan Teki <jagannadh.teki@gmail.com>: >>>> Hi, >>>> >>>> I have a simple question like these parts are legacy flashes i guess. >>>> Could you please tell me on which boards these were used? >>>> >>> >>> It's used on Faraday A369 evaluation board. >>> However the u-boot source codes for A369 is still waiting for approval. >>> Here is the link to u-boot patchwork: >> >> Ok, Thanks for your information. >> >>> >>> http://patchwork.ozlabs.org/patch/242006/ >>> >>>> Thanks, >>>> Jagan. >>>> >>>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>>>> From: Kuo-Jung Su <dantesu@faraday-tech.com> >>>>> >>>>> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> >>>>> --- >>>>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>>>> index 2716209..2a27837 100644 >>>>> --- a/drivers/mtd/spi/winbond.c >>>>> +++ b/drivers/mtd/spi/winbond.c >>>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>>>> >>>>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { >>>>> { >>>>> + .id = 0x2014, >>>>> + .nr_blocks = 16, >>>>> + .name = "W25P80", >> >> W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? >> ofcourse, I have seen the same on datasheet as well. >> > > It's W25P80. > They are formally NexFlash NX25P80, NX25P16 and NX25P32. > > I've google for the W25P08, it looks like that Windond did have > some legacy small SPI flash: W25P01, W25P02 .. W25P16. > I guess it's a different production line... > > BTW I don't have these chips and corresponding datasheet, too. Ok. Can you use the commit msg header as "sf: winbond: " Which is used for winbond mtd driver since from long, of-course not a big deal and also mentioned atleast single line message on body. Simple recommendation here:. "Add support for Winbond's W25PXX SPI flash. These devices is used on Faraday A369 evaluation board" Thanks, Jagan. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support 2013-05-23 10:44 ` Jagan Teki @ 2013-05-24 0:57 ` Kuo-Jung Su 0 siblings, 0 replies; 10+ messages in thread From: Kuo-Jung Su @ 2013-05-24 0:57 UTC (permalink / raw) To: u-boot 2013/5/23 Jagan Teki <jagannadh.teki@gmail.com>: > On Thu, May 23, 2013 at 3:24 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >> 2013/5/23 Jagan Teki <jagannadh.teki@gmail.com>: >>> Hi, >>> >>> On Wed, May 22, 2013 at 6:31 AM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>>> 2013/5/22 Jagan Teki <jagannadh.teki@gmail.com>: >>>>> Hi, >>>>> >>>>> I have a simple question like these parts are legacy flashes i guess. >>>>> Could you please tell me on which boards these were used? >>>>> >>>> >>>> It's used on Faraday A369 evaluation board. >>>> However the u-boot source codes for A369 is still waiting for approval. >>>> Here is the link to u-boot patchwork: >>> >>> Ok, Thanks for your information. >>> >>>> >>>> http://patchwork.ozlabs.org/patch/242006/ >>>> >>>>> Thanks, >>>>> Jagan. >>>>> >>>>> On Fri, Apr 26, 2013 at 1:32 PM, Kuo-Jung Su <dantesu@gmail.com> wrote: >>>>>> From: Kuo-Jung Su <dantesu@faraday-tech.com> >>>>>> >>>>>> Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> >>>>>> --- >>>>>> drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- >>>>>> 1 file changed, 16 insertions(+), 1 deletion(-) >>>>>> >>>>>> diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c >>>>>> index 2716209..2a27837 100644 >>>>>> --- a/drivers/mtd/spi/winbond.c >>>>>> +++ b/drivers/mtd/spi/winbond.c >>>>>> @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { >>>>>> >>>>>> static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { >>>>>> { >>>>>> + .id = 0x2014, >>>>>> + .nr_blocks = 16, >>>>>> + .name = "W25P80", >>> >>> W25P80 is an 8Mbit flash right, is this name W25P80 or W25P08? >>> ofcourse, I have seen the same on datasheet as well. >>> >> >> It's W25P80. >> They are formally NexFlash NX25P80, NX25P16 and NX25P32. >> >> I've google for the W25P08, it looks like that Windond did have >> some legacy small SPI flash: W25P01, W25P02 .. W25P16. >> I guess it's a different production line... >> >> BTW I don't have these chips and corresponding datasheet, too. > > Ok. > > Can you use the commit msg header as > "sf: winbond: " > Which is used for winbond mtd driver since from long, of-course not a > big deal and > also mentioned atleast single line message on body. > Sure, I'll re-format the patch and re-post again. > Simple recommendation here:. > "Add support for Winbond's W25PXX SPI flash. > These devices is used on Faraday A369 evaluation board" > Thanks. It's pretty helpful to me, because my English is really terrible. :) > Thanks, > Jagan. -- Best wishes, Kuo-Jung Su ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash 2013-04-26 8:02 [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su 2013-05-21 17:10 ` Jagan Teki @ 2013-05-24 1:09 ` Kuo-Jung Su 2013-05-25 18:22 ` Jagan Teki 2013-05-28 7:45 ` [U-Boot] [U-Boot, " Jagan Teki 1 sibling, 2 replies; 10+ messages in thread From: Kuo-Jung Su @ 2013-05-24 1:09 UTC (permalink / raw) To: u-boot From: Kuo-Jung Su <dantesu@faraday-tech.com> Add support for Winbond's W25PXX SPI flash. These devices is used on Faraday A369 evaluation board. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Jagan Teki <jagannadh.teki@gmail.com> CC: Tom Rini <trini@ti.com> --- Changes for v2: - Update commit message header - Add commit message body drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index 2716209..2a27837 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { { + .id = 0x2014, + .nr_blocks = 16, + .name = "W25P80", + }, + { + .id = 0x2015, + .nr_blocks = 32, + .name = "W25P16", + }, + { + .id = 0x2016, + .nr_blocks = 64, + .name = "W25P32", + }, + { .id = 0x3013, .nr_blocks = 8, .name = "W25X40", @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) } flash->page_size = 256; - flash->sector_size = 4096; + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; flash->size = 4096 * 16 * params->nr_blocks; return flash; -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash 2013-05-24 1:09 ` [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su @ 2013-05-25 18:22 ` Jagan Teki 2013-05-28 7:45 ` [U-Boot] [U-Boot, " Jagan Teki 1 sibling, 0 replies; 10+ messages in thread From: Jagan Teki @ 2013-05-25 18:22 UTC (permalink / raw) To: u-boot On Fri, May 24, 2013 at 6:39 AM, Kuo-Jung Su <dantesu@gmail.com> wrote: > From: Kuo-Jung Su <dantesu@faraday-tech.com> > > Add support for Winbond's W25PXX SPI flash. > These devices is used on Faraday A369 evaluation board. > > Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> > CC: Jagan Teki <jagannadh.teki@gmail.com> > CC: Tom Rini <trini@ti.com> > --- > Changes for v2: > - Update commit message header > - Add commit message body > > drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c > index 2716209..2a27837 100644 > --- a/drivers/mtd/spi/winbond.c > +++ b/drivers/mtd/spi/winbond.c > @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { > > static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { > { > + .id = 0x2014, > + .nr_blocks = 16, > + .name = "W25P80", > + }, > + { > + .id = 0x2015, > + .nr_blocks = 32, > + .name = "W25P16", > + }, > + { > + .id = 0x2016, > + .nr_blocks = 64, > + .name = "W25P32", > + }, > + { > .id = 0x3013, > .nr_blocks = 8, > .name = "W25X40", > @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) > } > > flash->page_size = 256; > - flash->sector_size = 4096; > + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; > flash->size = 4096 * 16 * params->nr_blocks; > > return flash; > -- > 1.7.9.5 > Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> -- Thanks, Jagan. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [U-Boot] [U-Boot, v2] sf: winbond: Add support for W25PXX SPI flash 2013-05-24 1:09 ` [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su 2013-05-25 18:22 ` Jagan Teki @ 2013-05-28 7:45 ` Jagan Teki 1 sibling, 0 replies; 10+ messages in thread From: Jagan Teki @ 2013-05-28 7:45 UTC (permalink / raw) To: u-boot On 23-05-2013 20:39, Kuo-Jung Su wrote: > From: Kuo-Jung Su <dantesu@faraday-tech.com> > > Add support for Winbond's W25PXX SPI flash. > These devices is used on Faraday A369 evaluation board. > > Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> > CC: Jagan Teki <jagannadh.teki@gmail.com> > CC: Tom Rini <trini@ti.com> > > --- > Changes for v2: > - Update commit message header > - Add commit message body > > drivers/mtd/spi/winbond.c | 17 ++++++++++++++++- > 1 file changed, 16 insertions(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c > index 2716209..2a27837 100644 > --- a/drivers/mtd/spi/winbond.c > +++ b/drivers/mtd/spi/winbond.c > @@ -18,6 +18,21 @@ struct winbond_spi_flash_params { > > static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { > { > + .id = 0x2014, > + .nr_blocks = 16, > + .name = "W25P80", > + }, > + { > + .id = 0x2015, > + .nr_blocks = 32, > + .name = "W25P16", > + }, > + { > + .id = 0x2016, > + .nr_blocks = 64, > + .name = "W25P32", > + }, > + { > .id = 0x3013, > .nr_blocks = 8, > .name = "W25X40", > @@ -104,7 +119,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) > } > > flash->page_size = 256; > - flash->sector_size = 4096; > + flash->sector_size = (idcode[1] == 0x20) ? 65536 : 4096; > flash->size = 4096 * 16 * params->nr_blocks; > > return flash; Applied to u-boot-spi/master -- Thanks, Jagan. ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-05-28 7:45 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-04-26 8:02 [U-Boot] [PATCH] mtd: spi: winbond: add W25PXX support Kuo-Jung Su 2013-05-21 17:10 ` Jagan Teki 2013-05-22 1:01 ` Kuo-Jung Su 2013-05-23 8:27 ` Jagan Teki 2013-05-23 9:54 ` Kuo-Jung Su 2013-05-23 10:44 ` Jagan Teki 2013-05-24 0:57 ` Kuo-Jung Su 2013-05-24 1:09 ` [U-Boot] [PATCH v2] sf: winbond: Add support for W25PXX SPI flash Kuo-Jung Su 2013-05-25 18:22 ` Jagan Teki 2013-05-28 7:45 ` [U-Boot] [U-Boot, " Jagan Teki
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox