From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lubomir Popov Date: Tue, 04 Jun 2013 09:49:56 +0300 Subject: [U-Boot] [PATCH V5] ARM: OMAP: I2C: New read, write and probe functions In-Reply-To: <51AD6C92.1040408@denx.de> References: <51AAD632.9090903@denx.de> <51AC2607.3000209@denx.de> <51AD6C92.1040408@denx.de> Message-ID: <51AD8E14.6000201@mm-sol.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heiko, On 04/06/13 07:26, Heiko Schocher wrote: > Hello Lubomir, > > Am 03.06.2013 07:13, schrieb Heiko Schocher: >> Hello Lubomir, >> >> Am 02.06.2013 13:42, schrieb Lubomir Popov: >>>> Hello Lubomir, >>>> >>>> Am 01.06.2013 18:44, schrieb Lubomir Popov: >>>>> New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4 >>>>> (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older >>>>> OMAPs and derivatives as well. The only anticipated exception would >>>>> be the OMAP2420, which shall require driver modification. >> [...] >>>>> drivers/i2c/omap24xx_i2c.c | 490 +++++++++++++++++++++++++++------------------ >>>>> 1 file changed, 299 insertions(+), 191 deletions(-) >>>> >>>> Tested on 3 arm335x based boards, which one uses i2c in SPL >>>> code for getting ram parameters, so: >>>> >>>> Tested-by: Heiko Schocher >>> Many thanks for testing, to Tom as well (he did it on the >>> Beagleboards, but for one of the older versions, V3 I believe, >>> right?). >>> When it comes to versions, I see that V1 and V2 are still listed >>> in patchwork, probably because of slightly different wording of >>> the subject: >>> http://patchwork.ozlabs.org/patch/233823/ >>> http://patchwork.ozlabs.org/patch/246204/ >>> Could you or Tom clean this up, please? Thanks. >> >> Cleared the v3 v4 version, but missed the v2 and v1, Done. > > just doing a "MAKEALL arm" with your patch applied and get this error: > > Configuring for omap2420h4 board... > omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named 'irqstatus_raw' > omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named 'irqstatus_raw' > arm-linux-gnueabi-size: './u-boot': No such file > omap24xx_i2c.c: In function 'wait_for_bb': > omap24xx_i2c.c:497:17: error: 'struct i2c' has no member named 'irqstatus_raw' > omap24xx_i2c.c: In function 'wait_for_event': > omap24xx_i2c.c:528:12: error: 'struct i2c' has no member named 'irqstatus_raw' > make[1]: *** [omap24xx_i2c.o] Fehler 1 > make: *** [drivers/i2c/libi2c.o] Fehler 2 > make: *** Warte auf noch nicht beendete Prozesse... > > Please fix this and run a "MAKEALL arm" before repost, thanks! We have agreed upon this breakage with Tom - the OMAP2420 shall not be supported anymore in the next release. At least I understood it that way (and have noted it accordingly in the comments). I could of course make a very simple modification that would allow build without errors, but the driver shall not work on the 2420; in order to make it work, a more serious rework is required. I don't have however any 2420 hardware to test upon. Tom? > > bye, > Heiko > Regards, Lubo