From mboxrd@z Thu Jan 1 00:00:00 1970 From: Minkyu Kang Date: Tue, 04 Jun 2013 16:34:26 +0900 Subject: [U-Boot] [PATCH] I2C: Exynos5: Reduce the Delay in s3c24x0 i2c driver In-Reply-To: <1364186310-1383-1-git-send-email-akshay.s@samsung.com> References: <1364186310-1383-1-git-send-email-akshay.s@samsung.com> Message-ID: <51AD9882.9020008@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Alim Akhtar, On 25/03/13 13:38, Akshay Saraswat wrote: > From: Alim Akhtar > > When no device is conneted on the i2c channel then i2c_probe command conneted -> connected > was taking too much of time (around 3 mins) to come out from the loop. > Now reduced the delay loop to milisec value. > This is tested on smdk5250 only. As i dont have s3c24x0 boards, so i cannt > test on these baord. dont -> don't, cannt -> can't?, baord -> board And these two line(This is tested... board) should move under "---" line. I think it is not a commit msg. > > Signed-off-by: Alim Akhtar > Signed-off-by: Doug Anderson > Signed-off-by: Akshay Saraswat > --- > drivers/i2c/s3c24x0_i2c.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > Patch looks good. Please fix typo. Thanks, Minkyu Kang.