From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 04 Jun 2013 17:08:11 +0200 Subject: [U-Boot] [PATCH] Add splash screen support via loading from flash In-Reply-To: References: <1369947781-25077-1-git-send-email-robert.winkler@boundarydevices.com> <51AC495C.5040003@denx.de> <51ADEF36.2000505@denx.de> <51ADF1B6.7020307@boundarydevices.com> <51ADF682.1040305@denx.de> <51ADFA0E.6060603@boundarydevices.com> Message-ID: <51AE02DB.3000205@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Robert, On 04/06/2013 16:57, Robert Winkler wrote: > Yes, as Eric mentioned I submitted a patch yesterday which fixes > splash screen prepare not working > with CONFIG_VIDEO and will submit a separate patch to add the function > to nitrogen6x.c once that goes through. Ok, understood. > > The only difference is that we won't call it in board_video_skip in > nitrogen6x.c, it'll be called in > drv_video_init similar to the way it is called in lcd_logo from drv_lcd_init. > > Another thing that Eric pointed out that is a difference between > PREBOOT and SPLASH_SCREEN_PREPARE > is the former will always run but the latter will only run if there's > a display which is preferable. > > If I had submitted the fix first instead of just working around the > bug I would probably have saved > some confusion. Sorry about that. No worry - thanks for explanation, now we have better understood the issue. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================