From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Date: Tue, 04 Jun 2013 21:38:19 -0600 Subject: [U-Boot] [PATCH V2 REPOST 1/2] lcd: add functions to set up simplefb device tree In-Reply-To: <1369715478-3655-1-git-send-email-swarren@wwwdotorg.org> References: <1369715478-3655-1-git-send-email-swarren@wwwdotorg.org> Message-ID: <51AEB2AB.2070901@wwwdotorg.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/27/2013 10:31 PM, Stephen Warren wrote: > simple-framebuffer is a new device tree binding that describes a pre- > configured frame-buffer memory region and its format. The Linux kernel > contains a driver that supports this binding. Implement functions to > create a DT node (or fill in an existing node) with parameters that > describe the framebuffer format that U-Boot is using. > > This will be immediately used by the Raspberry Pi board in U-Boot, and > likely will be used by the Samsung ARM ChromeBook support soon too. It > could well be used by many other boards (e.g. Tegra boards with built-in > LCD panels, which aren't yet supported by the Linux kernel). Anatolij, do these patches look good? Are you waiting for Albert to ack patch 2 in order to take it through the LCD tree? Thanks.