From mboxrd@z Thu Jan  1 00:00:00 1970
From: Armando Visconti <armando.visconti@st.com>
Date: Wed, 5 Jun 2013 14:52:46 +0200
Subject: [U-Boot] [u-boot] spi/arm-pl022: Add support for ARM PL022 spi
	controller
In-Reply-To: <CAD6G_RQcgft=f1WhYbLz0c50mjNWF08cEttVaaeFxgE5NEqzGQ@mail.gmail.com>
References: <1370247895-4097-1-git-send-email-armando.visconti@st.com>
	<CAD6G_RRP1bfH-BCgUbr7JL0ufBtwY_==UJZKaAsoV+Z9UGLCWQ@mail.gmail.com>
	<51AC6A7B.5060809@st.com>
	<CAD6G_RQcgft=f1WhYbLz0c50mjNWF08cEttVaaeFxgE5NEqzGQ@mail.gmail.com>
Message-ID: <51AF349E.3000509@st.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 06/03/2013 12:10 PM, Jagan Teki wrote:
>> I completely lost the original thread... I will re-start from V3...
>>
>> Pls discard this noisy thread,
>
> Please check the below thread for earlier v3
> http://patchwork.ozlabs.org/patch/205814/
>
>

Thx Jagan,

I have a v4 ready, where I just corrected the checkpatch errors.

Nevertheless, I failed to find your comments over the v3.
Can you possibly send to me the link to the discussion thread?

Thx,
Arm