From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lubomir Popov Date: Thu, 06 Jun 2013 12:02:31 +0300 Subject: [U-Boot] [PATCH v2] OMAP5: Fix bug in omap5_es1_prcm struct In-Reply-To: References: Message-ID: <51B05027.4040903@mm-sol.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom, On 26/05/13 23:03, Lubomir Popov wrote: > The newly introduced function setup_warmreset_time(), called > from within prcm_init(), tries to write to the prm_rsttime > OMAP5 register. The struct member holding this register's > address is however initialized for OMAP5 ES2.0 only. On ES1.0 > devices this uninitialized value causes a second (warm) reset > at startup. > > Add .prm_rsttime address init to the ES1.0 struct. > > Signed-off-by: Lubomir Popov > --- > V2 gives the correct prm_rsttime reg address for ES1.0. Copy-paste > from ES2.0 in V1, sorry. > > arch/arm/cpu/armv7/omap5/prcm-regs.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c > index e9f6a32..f29ac77 100644 > --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c > +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c > @@ -298,6 +298,7 @@ struct prcm_regs const omap5_es1_prcm = { > .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, > .prm_rstctrl = 0x4ae07b00, > .prm_rstst = 0x4ae07b04, > + .prm_rsttime = 0x4ae07b08, > .prm_vc_val_bypass = 0x4ae07ba0, > .prm_vc_cfg_i2c_mode = 0x4ae07bb4, > .prm_vc_cfg_i2c_clk = 0x4ae07bb8, > Could you please apply http://patchwork.ozlabs.org/patch/246454/ to the ti tree? This is the only obstacle for my board to boot normally with a clean u-boot-ti in respect to the OMAP5 common stuff. Thanks, Lubo