From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 06 Jun 2013 15:46:34 +0200 Subject: [U-Boot] [PATCH v3] ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART In-Reply-To: <1370394339-25279-1-git-send-email-festevam@gmail.com> References: <1370394339-25279-1-git-send-email-festevam@gmail.com> Message-ID: <51B092BA.9050104@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/06/2013 03:05, Fabio Estevam wrote: > From: Fabio Estevam > > When running the "save" command several times on a mx6qsabresd we see: > > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > U-Boot > save > Saving Environment to MMC... > Writing to MMC(1)... done > U-Boot > save > Saving Environment to MMC... > MMC partition switch failed > > This issue is caused by the incorrect usage of CONFIG_SYS_MMC_ENV_PART. > > CONFIG_SYS_MMC_ENV_PART should be used to specify the mmc partition that stores > the environment variables. > > On some imx boards it is been incorrectly used to pass the partition of kernel > and dtb files for the 'mmcpart' script variable. > > Remove the CONFIG_SYS_MMC_ENV_PART usage and configure the 'mmcpart' variable > directly. > > Reported-by: Jason Liu > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================