[U-Boot] [PATCH v2] powerpc/85xx: Add P1023RDB board support

[Chunhe Lan <b25806@freescale.com>]

On 06/12/2013 02:00 AM, Scott Wood wrote:
> On 06/09/2013 05:24:05 AM, Chunhe Lan wrote:
>> +    /* W**G* - Flash, localbus */
>> +    /* This will be changed to *I*G* after relocation to RAM. */
>> +    SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
>> +              MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G,
>> +              0, 2, BOOKE_PAGESZ_256M, 1),
>
> Do not set MAS3_SX on I/O regions.

           Here is need to use MAS3_SX, or u-boot does NOT work.

>> +/*
>> + * Memory map
>> + *
>> + * 0x0000_0000    0x1fff_ffff    DDR            500M Cacheable
>
> 500M?  Are you sure?

      Yes, system has the 500MB size of ddr.

Thanks,
-Chunhe

>> +#if defined(CONFIG_CMD_KGDB)
>> +#define CONFIG_KGDB_BAUDRATE    230400    /* speed to run kgdb 
>> serial port */
>> +#define CONFIG_KGDB_SER_INDEX    2    /* which serial port to use */
>> +#endif
>
> Get rid of this.
>
>> +#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
>
> The out-of-the-box environment is not going to work unmodified (I 
> don't even see a CONFIG_BOOTCOMMAND), so let's just default this to -1 
> now that it no longer has the affect of disabling the code at 
> compile-time.
>
> -Scott