[U-Boot] [PATCH v2 7/7] am335x_evm: Add support to boot from NOR.

[Stefan Roese <sr@denx.de>]

Hi Mark,

On 17.06.2013 17:23, Mark Jackson wrote:
> On 17/06/13 15:59, Mark Jackson wrote:
>> On 17/06/13 15:49, Tom Rini wrote:
>>
>> <snip>
>>
>>> Did you copy the parts that setup the pinmuxing in s_init for NOR?
>>
>> This bit ?
>>
>> #ifdef CONFIG_NOR_BOOT
>> 	asm("stmfd      sp!, {r2 - r4}");
>> 	asm("movw       r4, #0x8A4");
>> 	asm("movw       r3, #0x44E1");
>> 	asm("orr        r4, r4, r3, lsl #16");
>> 	asm("mov        r2, #9");
>> 	asm("mov        r3, #8");
>> 	asm("gpmc_mux:  str     r2, [r4], #4");
>> 	asm("subs       r3, r3, #1");
>> 	asm("bne        gpmc_mux");
>> 	asm("ldmfd      sp!, {r2 - r4}");
>> #endif
>>
>> Yes ... :-)
>>
> 
> Below is my entire s_init() routine.
> 
> One question ... the SPL code has:-
> 
> 	...
> 	gd = &gdata;
> 	...
> 
> But there seems to be no similar assignment when in NOR boot mode.
> I'm no expert in the internal workings of u-boot, so I thought I'd
> check, just in case !?!

I just noticed you mentioning "gd" here and wanted to point you to a
patch that fixed a gd-related boot issue for me on OMAP3:

[U-Boot] [PATCH 1/3] arm: spl: Fix SPL booting for OMAP3

(sorry, I can't find a link to this patch right now and I'm in a hurry)

Not sure if this has something to do with your problem (I don't have the
time to dig into this mail thread today as I'm leaving right now).

Cheers,
Stefan