From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Warren Date: Mon, 17 Jun 2013 10:48:09 -0600 Subject: [U-Boot] [PATCH v3 3/3] Tegra: Config: Enable Tegra30/Tegra114 USB function In-Reply-To: <1371460197-17912-3-git-send-email-jilin@nvidia.com> References: <1371460197-17912-1-git-send-email-jilin@nvidia.com> <1371460197-17912-3-git-send-email-jilin@nvidia.com> Message-ID: <51BF3DC9.4040907@wwwdotorg.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 06/17/2013 03:09 AM, Jim Lin wrote: > Add USB EHCI, storage and network support. > > Tested on Tegra30 Cardhu, and Tegra114 Dalmore > platforms. All works well. > diff --git a/include/configs/beaver.h b/include/configs/beaver.h > +/* USB Host support */ I notice that some Tegra20 boards include the following line here: #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 Is this necessary here too? If it doesn't serve any purpose, can you send an extra patch to remove this from seaboard.h, harmony.h, trimslice.h, and colibtri_t20_iris.h. Thanks. > +#define CONFIG_USB_EHCI > +#define CONFIG_USB_EHCI_TEGRA > +#define CONFIG_USB_STORAGE > +#define CONFIG_CMD_USB