From: Lubomir Popov <lpopov@mm-sol.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count
Date: Fri, 21 Jun 2013 13:09:31 +0300 [thread overview]
Message-ID: <51C4265B.2090500@mm-sol.com> (raw)
In-Reply-To: <1371804605.20409.2.camel@phoenix>
Axel,
Why do you introduce a function when this stuff is constant and known
to the compiler? Just put a #define in every header. You are now
uselessly inflating code...
Regards,
Lubo
On 21/06/13 11:50, Axel Lin wrote:
> Now the omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs.
> These SoCs have various gpio count. Thus introduce get_omap_gpio_count()
> function to get correct gpio count.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
> arch/arm/cpu/armv7/am33xx/board.c | 5 +++++
> arch/arm/cpu/armv7/omap3/board.c | 5 +++++
> arch/arm/cpu/armv7/omap4/hwinit.c | 5 +++++
> arch/arm/cpu/armv7/omap5/hwinit.c | 5 +++++
> arch/arm/include/asm/omap_gpio.h | 1 +
> drivers/gpio/omap_gpio.c | 2 +-
> 6 files changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
> index 885fb2d..405d649 100644
> --- a/arch/arm/cpu/armv7/am33xx/board.c
> +++ b/arch/arm/cpu/armv7/am33xx/board.c
> @@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_am33xx[4] = {
>
> const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
>
> +unsigned int get_omap_gpio_count(void)
> +{
> + return ARRAY_SIZE(gpio_bank_am33xx) * 32;
> +}
> +
> #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
> int cpu_mmc_init(bd_t *bis)
> {
> diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
> index b72fadc..950b13f 100644
> --- a/arch/arm/cpu/armv7/omap3/board.c
> +++ b/arch/arm/cpu/armv7/omap3/board.c
> @@ -65,6 +65,11 @@ static const struct gpio_bank gpio_bank_34xx[6] = {
>
> const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
>
> +unsigned int get_omap_gpio_count(void)
> +{
> + return ARRAY_SIZE(gpio_bank_34xx) * 32;
> +}
> +
> #ifdef CONFIG_SPL_BUILD
> /*
> * We use static variables because global data is not ready yet.
> diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
> index 81f5a48..3212980 100644
> --- a/arch/arm/cpu/armv7/omap4/hwinit.c
> +++ b/arch/arm/cpu/armv7/omap4/hwinit.c
> @@ -51,6 +51,11 @@ static const struct gpio_bank gpio_bank_44xx[6] = {
>
> const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
>
> +unsigned int get_omap_gpio_count(void)
> +{
> + return ARRAY_SIZE(gpio_bank_44xx) * 32;
> +}
> +
> #ifdef CONFIG_SPL_BUILD
> /*
> * Some tuning of IOs for optimal power and performance
> diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
> index 11ba36b..58c77e7 100644
> --- a/arch/arm/cpu/armv7/omap5/hwinit.c
> +++ b/arch/arm/cpu/armv7/omap5/hwinit.c
> @@ -56,6 +56,11 @@ static struct gpio_bank gpio_bank_54xx[8] = {
>
> const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
>
> +unsigned int get_omap_gpio_count(void)
> +{
> + return ARRAY_SIZE(gpio_bank_54xx) * 32;
> +}
> +
> #ifdef CONFIG_SPL_BUILD
> /* LPDDR2 specific IO settings */
> static void io_settings_lpddr2(void)
> diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h
> index 1ebfa86..5e25707 100644
> --- a/arch/arm/include/asm/omap_gpio.h
> +++ b/arch/arm/include/asm/omap_gpio.h
> @@ -46,6 +46,7 @@ struct gpio_bank {
> };
>
> extern const struct gpio_bank *const omap_gpio_bank;
> +extern unsigned int get_omap_gpio_count(void);
>
> #define METHOD_GPIO_24XX 4
>
> diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
> index a30d7f0..1088803 100644
> --- a/drivers/gpio/omap_gpio.c
> +++ b/drivers/gpio/omap_gpio.c
> @@ -55,7 +55,7 @@ static inline int get_gpio_index(int gpio)
>
> int gpio_is_valid(int gpio)
> {
> - return (gpio >= 0) && (gpio < 192);
> + return (gpio >= 0) && (gpio < get_omap_gpio_count());
> }
>
> static int check_gpio(int gpio)
>
prev parent reply other threads:[~2013-06-21 10:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-21 8:47 [U-Boot] [PATCH 1/2] OMAP5: Fix gpio_bank_54xx setting Axel Lin
2013-06-21 8:50 ` [U-Boot] [PATCH 2/2] OMAP: gpio: Introduce get_omap_gpio_count() function to get gpio count Axel Lin
2013-06-21 10:09 ` Lubomir Popov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C4265B.2090500@mm-sol.com \
--to=lpopov@mm-sol.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox