[U-Boot] [U-Boot, v2] powerpc/mpc85xx:Disable Debug TLB entry before init_tlbs

[Prabhakar Kushwaha <prabhakar@freescale.com>]

On 06/24/2013 08:44 AM, Prabhakar Kushwaha wrote:
> On 06/22/2013 02:42 AM, Scott Wood wrote:
>> On 06/21/2013 04:05:37 PM, Fleming Andy-AFLEMING wrote:
>>>
>>> On Jun 21, 2013, at 3:59 PM, Scott Wood wrote:
>>>
>>> > On 06/21/2013 03:38:48 PM, Andy Fleming wrote:
>>> >> On Thu, Jun 13, 2013 at 10:14:00AM +0530, Prabhakar Kushwaha wrote:
>>> >> > init_tlbs() initialize all the TLB entries required for the 
>>> system.
>>> >> >
>>> >> > So disable DEBUG TLB entry before TLB entries initialization.
>>> >> >
>>> >> > Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
>>> >> Applied, with fixes.
>>> >> > diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c 
>>> b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > index f4403c2..340b063 100644
>>> >> > --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
>>> >> > @@ -180,5 +180,9 @@ void cpu_init_early_f(void)
>>> >> >
>>> >> >      invalidate_tlb(1);
>>> >> >
>>> >> > +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && 
>>> !defined(CONFIG_SPL_BUILD)
>>> >> > +    disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB);
>>> >> > +#endif
>>> >> Had to add CONFIG_NAND_SPL here, as well, just for future reference
>>> >
>>> > Why exclude all SPLs?  Only minimal SPLs skip creating the debug TLB.
>>>
>>> The definition of disable_tlb() is excluded when NAND_SPL is defined.
>>
>> I'm talking about new-SPL, not NAND_SPL.  My comment is about the 
>> original patch (I made the comment before internally), not your edit 
>> to it.
>>
> as per comment from Scott, we should have below define. It takes care 
> of SPL minimal + nand_spl
>
> #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && 
> !defined(CONFIG_SPL_INIT_MINIMAL) && !defined(CONFIG_NAND_SPL)
>
> May I resend this patch?
>
>

just a afterthought, current modified* patch is correct i.e. " #if 
defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_SPL_BUILD) && 
!defined(CONFIG_NAND_SPL)"
DEBUG TLB never been created for SPL & NAND_SPL so no need to disable.

Regards,
Prabhakar