From mboxrd@z Thu Jan 1 00:00:00 1970 From: Minkyu Kang Date: Mon, 24 Jun 2013 21:04:52 +0900 Subject: [U-Boot] [PATCH 0/4 V7] EXYNOS5250: FDT: Add device tree support for console In-Reply-To: <1372072643-1402-1-git-send-email-rajeshwari.s@samsung.com> References: <1372072643-1402-1-git-send-email-rajeshwari.s@samsung.com> Message-ID: <51C835E4.6050009@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24/06/13 20:17, Rajeshwari Shinde wrote: > Enabled fdt support for default console on EXYNOS5250. > > Changes in V2: > - Changed the compatible string to "samsung,exynos4210-uart" > Changes in V3: > - Rebased the patchset on latest u-boot-samsung branch. > - Added a alias console as we will support one at any point of time. > - Moved driver config structure to data section. > - Changed silent_console to silent-console. > - Did put a check for base address before doing fdt decoding. > Changes in V4: > - Rebased the patchset on latest u-boot-samsung branch. > - Changed to COMPAT_SAMSUNG_EXYNOS5_SERIAL to COMPAT_SAMSUNG_EXYNOS_SERIAL > Changes in V5: > - Added serial device node for Snow board. > Changes in V6: > - Rebased the patchset on latest u-boot-samsung branch. > - Changed the if..else condition to a switch statement. > - Moved compatible strings up with all other samsung strings. > Changes in V7: > - Removed a extra line. > > Rajeshwari Shinde (4): > EXYNOS5: FDT: Add compatible strings for Serial > EXYNOS5: FDT: Add serial device node values > S5P: Serial: Add fdt support to driver > CONFIG: EXYNOS5: Enable silent console > > arch/arm/dts/exynos5250.dtsi | 27 ++++++++++ > board/samsung/dts/exynos5250-smdk5250.dts | 2 + > board/samsung/dts/exynos5250-snow.dts | 2 + > drivers/serial/serial_s5p.c | 78 +++++++++++++++++++++++++++++ > include/configs/exynos5250-dt.h | 2 +- > include/fdtdec.h | 1 + > lib/fdtdec.c | 1 + > 7 files changed, 112 insertions(+), 1 deletions(-) > applied to u-boot-samsung Thanks, Minkyu Kang.