[U-Boot] [PATCH 1/4] ARM: AM33xx: Cleanup dplls data

[Lokesh Vutla <lokeshvutla@ti.com>]

Hi Heiko,
On Tuesday 25 June 2013 12:42 AM, Heiko Schocher wrote:
> Hello Lokesh,
>
> Am 24.06.2013 15:15, schrieb Lokesh Vutla:
>> Locking sequence for all the dplls is same.
>> In the current code same sequence is done repeatedly
>> for each dpll. Instead have a generic function
>> for locking dplls and pass dpll data to that function.
>>
>> This is derived from OMAP4 boards.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>>   arch/arm/cpu/armv7/am33xx/Makefile           |    1 +
>>   arch/arm/cpu/armv7/am33xx/clock.c            |  116 ++++++++++++++
>>   arch/arm/cpu/armv7/am33xx/clock_am33xx.c     |  222 +++++---------------------
>>   arch/arm/cpu/armv7/am33xx/emif4.c            |    4 +
>>   arch/arm/include/asm/arch-am33xx/clock.h     |   68 ++++++++
>>   arch/arm/include/asm/arch-am33xx/ddr_defs.h  |    2 +
>>   arch/arm/include/asm/arch-am33xx/sys_proto.h |    1 +
>>   7 files changed, 232 insertions(+), 182 deletions(-)
>>   create mode 100644 arch/arm/cpu/armv7/am33xx/clock.c
>>
> [...]
>> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
>> new file mode 100644
>> index 0000000..a7f1d83
>> --- /dev/null
>> +++ b/arch/arm/cpu/armv7/am33xx/clock.c
>> @@ -0,0 +1,116 @@
> [...]
>> +static void do_setup_dpll(const struct dpll_regs *dpll_regs,
>> +			  const struct dpll_params *params)
>> +{
>
> Could we have this function not only static? I posted a patch:
>
> [U-Boot] arm, am335x: make mpu pll config configurable
> http://patchwork.ozlabs.org/patch/248509/
>
> which uses mpu_pll_config() for switching mpu pll clock
> from board code ... you delete this function later in this patch,
> so I think, I can switch to do_setup_pll() ... if this is not
> static code ...
Yes I saw that patch. No need to make this non-static.
Please have your own struct "const struct dpll_params dpll_mpu"
and update your values accordingly.

Thanks and regards,
Lokesh
>
> [...]
>> diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
>> index 9c4d0b4..e878b25 100644
>> --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
>> +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
>> @@ -26,56 +26,53 @@
>>   #define PRCM_FORCE_WAKEUP	0x2
>>   #define PRCM_FUNCTL		0x0
>>
>> -#define PRCM_EMIF_CLK_ACTIVITY	BIT(2)
>> -#define PRCM_L3_GCLK_ACTIVITY	BIT(4)
>> -
>> -#define PLL_BYPASS_MODE		0x4
>> -#define ST_MN_BYPASS		0x00000100
>> -#define ST_DPLL_CLK		0x00000001
>> -#define CLK_SEL_MASK		0x7ffff
>> -#define CLK_DIV_MASK		0x1f
>> -#define CLK_DIV2_MASK		0x7f
>> -#define CLK_SEL_SHIFT		0x8
>> -#define CLK_MODE_SEL		0x7
>> -#define CLK_MODE_MASK		0xfffffff8
>> -#define CLK_DIV_SEL		0xFFFFFFE0
>>   #define CPGMAC0_IDLE		0x30000
>> -#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
>> -
>>   #define OSC	(V_OSCK/1000000)
>
> and could we move this define then to
> arch/arm/include/asm/arch-am33xx/clock.h
> too?
>
> Thnaks!
>
> bye,
> Heiko
>