From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Andreas_Bie=DFmann?= Date: Wed, 26 Jun 2013 08:35:47 +0200 Subject: [U-Boot] Help with Glomation GESBC-9G20 In-Reply-To: <75134A42-4D35-4F86-83EB-E1ECEAED90DC@usgs.gov> References: <90939CEC-1FC8-4894-AEA8-3C16E87249F8@usgs.gov> <51C7F559.1030908@atmel.com> <980EA73C-1606-4B65-ABFF-8999413822A2@usgs.gov> <51C801CB.2020508@atmel.com> <718CE3EA-8E06-4FAF-A9A9-0E63F0B2541B@usgs.gov> <51CA3EF0.8080900@atmel.com> <75134A42-4D35-4F86-83EB-E1ECEAED90DC@usgs.gov> Message-ID: <51CA8BC3.6030403@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Larry, On 26.06.13 03:55, Larry Baker wrote: > On Jun 25, 2013, at 6:08 PM, Bo Shen wrote: > >> Hi Larry Baker, >> >> On 06/26/2013 02:02 AM, Larry Baker wrote: >>> On 24 Jun 2013, at 1:22 AM, Bo Shen wrote: >>> >>>> Hi Larry Baker, >>>> >>>> On 6/24/2013 16:02, Larry Baker wrote: >>>> BTW, when you upgrade the u-boot, please also upgrade the bootstrap. >>>> we always keep the update bootstrap work with mainline u-boot properly. >>> >>> Will AT91loader be updated when U-Boot 2013.07 is released? If not, I >>> will put the current AT91loader on my board with U-Boot 2013.04 now. >> >> As Andreas described in previous e-mail, you can find the newest bootstrap at [1]. > > Yes, thank you. But, my question is, will AT91loader be updated when U-Boot 2013.07 is released? > If yes, I will wait. If no, I will use what you is available now. > You have said that one should update the loader when U-Boot is updated. This is what I wish to do. there is no release schedule aligned to the u-boot release schedule. If some change in u-boot requires changes in at91loader or vice versa the changes on the other side will be made. The current at91loader release (3.5.4 I think) has the required JUMP_ADDRESS change to run current u-boot (2013.04 and the upcoming one). Best regards Andreas Bie?mann >> [1] https://github.com/linux4sam/at91bootstrap