From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] U-Boot: am335x video support
Date: Wed, 26 Jun 2013 09:07:35 +0200 [thread overview]
Message-ID: <51CA9337.7050500@denx.de> (raw)
In-Reply-To: <51CA8E4D.8060206@esd.eu>
Hello Matthias,
Am 26.06.2013 08:46, schrieb Matthias Fuchs:
> Hi Heiko,
>
> perhaps you should take a look at the DA8XX driver. At least
> under Linux this driver also handles the AM335x.
Ah! Hmm... I found only one board, which uses this driver ...
But it is a good starting point I think!
Thanks!
> Splash screen support (meaning support of the splashimage variable)
> might be a problem because it expects a direct mapped physical address
> where the splash image is stored - typically some onboard nor flash. But
> AM335x designs typically have MMC, NAND or SPI flash attached. So you
> probably need some commands to load the spashscreen from a flash device
> and then use the 'bmp' command to display it. This should work with all
> video drivers.
Yep.
bye,
Heiko
> Matthias
>
> On 26.06.2013 08:29, Heiko Schocher wrote:
>> Hello,
>>
>> is in current U-Boot a lcd driver for the am335x integrated
>> LCD controller? If yes, also with Splash screen support?
>>
>> Thanks!
>>
>> bye,
>> Heiko
>>
>
>
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
prev parent reply other threads:[~2013-06-26 7:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-26 6:29 [U-Boot] U-Boot: am335x video support Heiko Schocher
2013-06-26 6:46 ` Matthias Fuchs
2013-06-26 7:07 ` Heiko Schocher [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51CA9337.7050500@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox