From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication
Date: Thu, 27 Jun 2013 15:40:36 +0200 [thread overview]
Message-ID: <51CC40D4.8070703@denx.de> (raw)
In-Reply-To: <1370974493-21822-16-git-send-email-sjg@chromium.org>
Hi Simon,
On 06/11/2013 08:14 PM, Simon Glass wrote:
> At present the bootm code is mostly duplicated for the plain 'bootm'
> command and its sub-command variant. This makes the code harder to
> maintain and means that changes must be made to several places.
>
> Introduce do_bootm_states() which performs selected portions of the bootm
> work, so that both plain 'bootm' and 'bootm <sub_command>' can use the
> same code.
>
> Additional duplication exists in bootz, so tidy that up as well. This
> is not intended to change behaviour, apart from minor fixes where the
> previously-duplicated code missed some chunks of code.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
Simon, this patch breaks bootm (at least on powerpc), while booting an
compressed uImage (with DT). It just hangs while decompressing the
kernel image:
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-3.5.7
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 2203312 Bytes = 2.1 MiB
Load Address: 00000000
Entry Point: 00000000
## Flattened Device Tree blob at 01800000
Booting using the fdt blob at 0x1800000
Uncompressing Kernel Image ...
I bisected mainline and this patch is the one that breaks booting:
[stefan at ubuntu-2012 u-boot ((983c72f...)|BISECTING)]$ git bisect good
35fc84fa1ff51e15ecd3e464dac87eb105ffed30 is the first bad commit
commit 35fc84fa1ff51e15ecd3e464dac87eb105ffed30
Author: Simon Glass <sjg@chromium.org>
Date: Tue Jun 11 11:14:47 2013 -0700
Refactor the bootm command to reduce code duplication
I already looked what might be wrong but I couldn't find any problem
upon a quick glance. You know this code may better. Perhaps you could
take look at it and give it a try as well.
Thanks,
Stefan
next prev parent reply other threads:[~2013-06-27 13:40 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-11 18:14 [U-Boot] [PATCH v2 0/21] Add tracing functionality to U-Boot Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 01/21] pci: Convert extern inline functions to static inline Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 02/21] x86: Correct missing local variable in bootm Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 03/21] Fix missing return in do_mem_loop() Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 04/21] Show stdout on error in fit-test Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 05/21] bootstage: Correct printf types Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 06/21] Add function to print a number with grouped digits Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 07/21] Add trace library Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 08/21] Add a trace command Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 09/21] Support tracing in config.mk when enabled Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 10/21] Add trace support to generic board Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 11/21] Add proftool to decode profile data Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 12/21] sandbox: Support trace feature Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 13/21] Add a simple test for sandbox trace Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 14/21] Clarify bootm OS arguments Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 15/21] Refactor the bootm command to reduce code duplication Simon Glass
2013-06-27 13:40 ` Stefan Roese [this message]
2013-06-27 14:40 ` Tom Rini
2013-06-27 15:39 ` Simon Glass
2013-06-27 19:51 ` Simon Glass
2013-06-27 20:07 ` Tom Rini
2013-06-28 2:14 ` Simon Glass
2013-06-28 4:12 ` Stefan Roese
2013-06-28 5:44 ` Simon Glass
2013-06-28 6:58 ` Simon Glass
2013-06-28 7:04 ` Stefan Roese
2013-06-28 7:12 ` Simon Glass
2013-06-28 7:57 ` Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 16/21] Add a 'fake' go command to the bootm command Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 17/21] arm: Implement the 'fake' go command Simon Glass
2013-06-11 19:59 ` Albert ARIBAUD
2013-06-11 20:02 ` Simon Glass
2013-06-11 20:21 ` Albert ARIBAUD
2013-06-11 21:17 ` Simon Glass
2013-06-11 21:36 ` Albert ARIBAUD
2013-06-20 4:16 ` Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 18/21] exynos: Avoid function instrumentation for microsecond timer Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 19/21] exynos: config: Add tracing options Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 20/21] x86: Support tracing function Simon Glass
2013-06-11 18:14 ` [U-Boot] [PATCH v2 21/21] x86: config: Add tracing options Simon Glass
2013-06-26 20:24 ` [U-Boot] [PATCH v2 0/21] Add tracing functionality to U-Boot Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51CC40D4.8070703@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox