From: Dan Murphy <dmurphy@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver
Date: Tue, 2 Jul 2013 10:23:51 -0500 [thread overview]
Message-ID: <51D2F087.7050001@ti.com> (raw)
In-Reply-To: <1372769977-7182-1-git-send-email-gautam.vivek@samsung.com>
Vivek
On 07/02/2013 07:59 AM, Vivek Gautam wrote:
> This change adds necessary xHCI host controller stack layer.
> This stack will eventually interact with SoC specific USB 3.0
> controller drivers to enable USB 3.0 support on different boards.
>
> Based on 'master' branch of u-boot-usb tree.
>
> The series also includes patches to support xHCI on exynos5250,
> including required driver, device tree changes and a temporary
> config change to test things finally on smdk5250.
>
> Vivek Gautam (7):
> arm: exynos5250: Define CONFIG_SYS_CACHELINE_SIZE
> USB: xHCI: Add stack support for xHCI
> USB: XHCI: Add xHCI host controller support for Exynos5
> arm: exynos: Add methods to control power to USB 3.0 PHY
> exynos5: dts: Add COMPAT string data for USB 3.0 PHY and XHCI
> exynos5: dts: Add device node for XHCI
> temp: ARM: EXYNOS5: Enable xHCI support for Exynos5
>
> arch/arm/cpu/armv7/exynos/power.c | 22 +
> arch/arm/dts/exynos5250.dtsi | 12 +
> arch/arm/include/asm/arch-exynos/cpu.h | 8 +
> arch/arm/include/asm/arch-exynos/power.h | 5 +
> arch/arm/include/asm/arch-exynos/xhci-exynos.h | 90 ++
> common/usb.c | 27 +-
> drivers/usb/host/Makefile | 4 +
> drivers/usb/host/xhci-exynos5.c | 324 ++++++
> drivers/usb/host/xhci-mem.c | 731 ++++++++++++++
> drivers/usb/host/xhci-ring.c | 899 +++++++++++++++++
> drivers/usb/host/xhci.c | 1040 +++++++++++++++++++
> drivers/usb/host/xhci.h | 1281 ++++++++++++++++++++++++
> include/configs/exynos5250-dt.h | 7 +
> include/fdtdec.h | 2 +
> include/linux/usb/dwc3.h | 190 ++++
> include/usb.h | 9 +-
> lib/fdtdec.c | 2 +
> 17 files changed, 4650 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-exynos/xhci-exynos.h
> create mode 100644 drivers/usb/host/xhci-exynos5.c
> create mode 100644 drivers/usb/host/xhci-mem.c
> create mode 100644 drivers/usb/host/xhci-ring.c
> create mode 100644 drivers/usb/host/xhci.c
> create mode 100644 drivers/usb/host/xhci.h
> create mode 100644 include/linux/usb/dwc3.h
>
I have done similar work for the DWC and xHCI back port. We seem to have two different implementations.
See my V3 patch series. If you want the initial patch sets or v2 let me know.
http://patchwork.ozlabs.org/patch/256451/
http://patchwork.ozlabs.org/patch/256449/
3/7 is waiting approval
http://patchwork.ozlabs.org/patch/256452/
http://patchwork.ozlabs.org/patch/256450/
6/7 is waiting approval
http://patchwork.ozlabs.org/patch/256453/
Marek
Please let us know which xHCI/DWC implementation you would like to have in main line.
Dan
--
------------------
Dan Murphy
next prev parent reply other threads:[~2013-07-02 15:23 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-02 12:59 [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 1/7] arm: exynos5250: Define CONFIG_SYS_CACHELINE_SIZE Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 2/7] USB: xHCI: Add stack support for xHCI Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 3/7] USB: XHCI: Add xHCI host controller support for Exynos5 Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 4/7] arm: exynos: Add methods to control power to USB 3.0 PHY Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 5/7] exynos5: dts: Add COMPAT string data for USB 3.0 PHY and XHCI Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 6/7] exynos5: dts: Add device node for XHCI Vivek Gautam
2013-07-02 12:59 ` [U-Boot] [PATCH 7/7] temp: ARM: EXYNOS5: Enable xHCI support for Exynos5 Vivek Gautam
2013-07-02 15:23 ` Dan Murphy [this message]
2013-07-02 21:27 ` [U-Boot] [PATCH 0/7] USB: XHCI: Add xHCI host controller stack driver Marek Vasut
2013-07-03 11:15 ` Vivek Gautam
2013-07-08 13:01 ` Marek Vasut
2013-07-10 16:57 ` Dan Murphy
2013-07-18 20:53 ` Julius Werner
2013-07-19 16:57 ` Dan Murphy
2013-07-31 13:01 ` Dan Murphy
2013-07-31 13:55 ` Vivek Gautam
2013-07-31 14:18 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D2F087.7050001@ti.com \
--to=dmurphy@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox