[U-Boot] imx: Kernel not booting with fdt

[Stefano Babic <sbabic@denx.de>]

Hi Matthias,

Am 02/07/2013 17:26, schrieb Matthias Wei?er:
> Hi
> 
> I try to boot a current 3.11 kernel on a custom iMX25 board using DT.
> u-boot starts the kernel but it stops working just after the first
> eralyprintk lines are out. The u-boot/kernel output:
> 
> bootm 0x81000000 - 0x80800000

Never tried with a imx25, but it looks correct and there is enough space
between kernel and DT to avoid some corruption.

> ## Booting kernel from Legacy Image at 81000000 ...
>    Image Name:   Linux-3.10.0
>    Image Type:   ARM Linux Kernel Image (uncompressed)
>    Data Size:    3834336 Bytes = 3.7 MiB
>    Load Address: 80008000
>    Entry Point:  80008000
>    Verifying Checksum ... OK
> ## Flattened Device Tree blob at 80800000
>    Booting using the fdt blob at 0x80800000
>    Loading Kernel Image ... OK
> OK
>    Loading Device Tree to 8374f000, end 837545d4 ... OK
> 
> Starting kernel ...
> 
> Uncompressing Linux... done, booting the kernel.
> [    0.000000] Booting Linux on physical CPU 0x0
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Initializing cgroup subsys cpuacct
> [    0.000000] Linux version 3.10.0 (mweisser at ubuntu) (gcc version 4.7.3
> (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #4 Tue Jul 2 1
> 7:13:13 CEST 2013
> [    0.000000] CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ),
> cr=00053177
> [    0.000000] CPU: VIVT data cache, VIVT instruction cache
> [    0.000000] Machine: Generic DT based system, model: Graf-Syteco zmx25
> [    0.000000] bootconsole [earlycon0] enabled
> [    0.000000] Memory policy: ECC disabled, Data cache writeback
> 
> As this is my first contact with DT I expect a trivial error on my side.
> Anyone with any hint?

I cannot say a lot - it seems more an issue inside the dts file as how
you start the kernel. Maybe you can look in the _log_buf if you get some
more info.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================