From: DrEagle <dreagle@doukki.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/8] arm kirkwood add MVSDIO sheevaplug support
Date: Mon, 08 Jul 2013 01:47:49 +0200 [thread overview]
Message-ID: <51D9FE25.2050101@doukki.net> (raw)
In-Reply-To: <20130705230848.457e1e24@lilith>
- add sheevaplug MVSDIO driver support
Signed-off-by: drEagle <uboot@doukki.net>
board/Marvell/sheevaplug/sheevaplug.c |
include/configs/sheevaplug.h |
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 16efe64..2bd2568 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -28,6 +28,9 @@
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include "sheevaplug.h"
+#ifdef CONFIG_MRVL_MMC
+#include <mrvl_mmc.h>
+#endif /* CONFIG_MRVL_MMC */
DECLARE_GLOBAL_DATA_PTR;
@@ -147,3 +150,11 @@ void reset_phy(void)
printf("88E1116 Initialized on %s\n", name);
}
#endif /* CONFIG_RESET_PHY_R */
+
+#ifdef CONFIG_MRVL_MMC
+int board_mmc_init(bd_t *bis)
+{
+ mrvl_mmc_initialize(bis);
+ return 0;
+}
+#endif /* CONFIG_MRVL_MMC */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 83dd8ff..270fd56 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -39,17 +40,24 @@
/*
* Commands configuration
*/
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
@@ -98,17 +138,20 @@
#endif /* CONFIG_CMD_NET */
/*
* File system
*/
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_LZO
+/*
+ * SDIO/MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MRVL_MMC
+#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
+#endif /* CONFIG_CMD_MMC */
#endif /* _CONFIG_SHEEVAPLUG_H */
next prev parent reply other threads:[~2013-07-07 23:47 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-02 21:17 [U-Boot] Marvell SheevaPlug v2013.04 Refresh (ask for review) DrEagle
2013-07-05 21:08 ` Albert ARIBAUD
2013-07-07 23:41 ` DrEagle
2013-07-08 9:46 ` Albert ARIBAUD
2013-07-07 23:43 ` [U-Boot] [PATCH 0/8] arm kirkwood - sheevaplug refresh DrEagle
2013-07-07 23:44 ` [U-Boot] [PATCH 1/8] arm kirkwood - add kirkwood_id DrEagle
2013-07-07 23:44 ` [U-Boot] [PATCH 2/8] arm kirkwood update supported devices and revisions DrEagle
2013-07-07 23:45 ` [U-Boot] [PATCH 3/8] arm kirkwood add kw88f6282 support DrEagle
2013-07-07 23:46 ` [U-Boot] [PATCH 4/8] arm kirkwood add MVSDIO driver v3 DrEagle
2013-07-07 23:47 ` [U-Boot] [PATCH 5/8] arm kirkwood add MVSDIO kirkwood support DrEagle
2013-07-07 23:47 ` DrEagle [this message]
2013-07-07 23:48 ` [U-Boot] [PATCH 7/8] arm kirkwood add MVSATA sheevaplug support DrEagle
2013-07-07 23:49 ` [U-Boot] [PATCH 8/8] arm kirkwood update sheevaplug defaults config DrEagle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D9FE25.2050101@doukki.net \
--to=dreagle@doukki.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox