From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bastos Fernandez Alexandre <ALEBAS@televes.com>
Date: Thu, 16 Sep 2004 10:43:48 +0200
Subject: [U-Boot-Users] MPC8272ADS and uboot program check 
Message-ID: <51DB8827D393D411BB69003048003F46FDCEFA@tvesntr.televes.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Wolfgang,

>> 
>> >First of all, I would acknowleging that Wolfgang is probably right and
you
>> probably have a hardware problem.

>Please configure your mailer to quote correctly.

>BOTH lines above are quotes, but only the first  line  is  marked  as
>such.  This  essentially  makes  your messages unreadable. please fix
>this!

Sorry about that. For me all this was the same line. I haven't arrived to
configure my mailer to quote this way at all (so I have to do it by hand)
:-(
Sometimes, I have some problems to send plain-text only, but this is another
discussion.

>> It could be. I had some problem with the Flash in the past, but there,
the
>> board didn't start at all and kept rebooting in a few miliseconds with a
>> HRESET. 

>I think all additional discussion is in vain. You have known hardware
>problems, so it makes no sense to continue.

>Don't try to understand why the failure mode is a reset in  one  case
>or  a  spectacular crash in another one - when yoiur flash is failing
>you must assume that the CPU is executing random data.  This  can  be
>anything,  and  fail  at  any  time  andin  any way you can or cannot
>imagine.

>Stop here, and fix or replace the hardware.

OK. I will.

Thank for all.

Alex