From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bastos Fernandez Alexandre <ALEBAS@televes.com>
Date: Mon, 10 Jan 2005 09:22:26 +0100
Subject: [U-Boot-Users] Re: FCC2 issue on PQ2FADS
Message-ID: <51DB8827D393D411BB69003048003F46FDCF95@tvesntr>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Kumar,

Which MAC address is being sent as source by ping echo request?
Some time ago I found out some problem sending packets from one
interface with the MAC address from the other interface, which resulted
in the PHY doesn't capturing the reply packet

Best regards,

Alex 

> -----Original Message-----
> Cc: "u-boot-users list" <u-boot-users@lists.sourceforge.net>
> From: Kumar Gala <kumar.gala@freescale.com>
> Subject: Re: [U-Boot-Users] FCC2 issue on PQ2FADS
> Date: Fri, 7 Jan 2005 17:28:27 -0600
> To: "Yuli Barcohen" <yuli@arabellasw.com>
> 
> 
> On Jan 7, 2005, at 10:49 AM, Yuli Barcohen wrote:
> 
> > >>>>> Kumar Gala writes:
> >
> > =A0=A0=A0 Kumar> I've got a new PQ2FADS board and am having issues =
> with FCC2.
> >  =A0=A0=A0 Kumar> I'm using the 1.1.2 release, we seem to be able to =
> transmit
> >  =A0=A0=A0 Kumar> but not receive packets.
> >
> > =A0=A0=A0 Kumar> Any ideas?
> >
> > Is the board connected to the LAN using hub? If yes, try switch. There
> >  can be problems with half-duplex link.
> 
> I've tried both a hub & switch.  One odd thing was that the hub was=20
> reporting half duplex, but the board was report full.  I tried=20
> modifying the fcc_psmr to match, but that only made things worse.
> 
> I need to try using the other ethernet port and see what happens.
> 
> - kumar
> 
> 
> 
>