From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Sat, 13 Jul 2013 07:51:13 +0200 Subject: [U-Boot] [PATCH v8 3/3] MIPS: Jz4740: Add qi_lb60 board support In-Reply-To: <20130703095414.471D2380E12@gemini.denx.de> References: <4E95A2B0.9090404@pobox.com> <4E95A3BA.8000905@pobox.com> <51D3ED44.8080301@de.bosch.com> <20130703095414.471D2380E12@gemini.denx.de> Message-ID: <51E0EAD1.6070100@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Wolfgang and Tom, Am 03.07.2013 11:54, schrieb Wolfgang Denk: > Dear Xiangfu Liu, > > In message <4E95A3BA.8000905@pobox.com> you wrote: >> >> Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device >> from Qi hardware: >> >> http://en.qi-hardware.com/wiki/Ben_NanoNote >> http://en.qi-hardware.com/wiki/Main_Page >> http://en.wikipedia.org/wiki/Qi_hardware >> >> This Jz4740-based clamshell device does not use NOR flash to boot. >> The initial bring-up assumes that U-Boot is directly loaded into SDRAM >> using USB boot tool, and starts from 0x80100000. > ... >> MAINTAINERS | 4 + >> MAKEALL | 4 +- >> board/qi/qi_lb60/Makefile | 45 +++++++++ >> board/qi/qi_lb60/config.mk | 31 +++++++ >> board/qi/qi_lb60/qi_lb60.c | 104 +++++++++++++++++++++ >> board/qi/qi_lb60/u-boot.lds | 61 +++++++++++++ >> boards.cfg | 1 + >> include/configs/qi_lb60.h | 211 +++++++++++++++++++++++++++++++++++++++++++ >> 8 files changed, 460 insertions(+), 1 deletions(-) >> create mode 100644 board/qi/qi_lb60/Makefile >> create mode 100644 board/qi/qi_lb60/config.mk >> create mode 100644 board/qi/qi_lb60/qi_lb60.c >> create mode 100644 board/qi/qi_lb60/u-boot.lds >> create mode 100644 include/configs/qi_lb60.h > > It has been pointed out (see [1]) that the files > > board/qi/qi_lb60/qi_lb60.c > include/configs/qi_lb60.h > > added by this patch are licensed as GPL "version 3 of the License, or > (at your option) any later version" - however, this is incompatible > with the GPLv2 and GPLv2+ licenses that cover the rest of U-Boot. > > Would you be willing to re-license these files under GPLv2+ (and > submit apatch to do that) ? Otherwise we would probably be forced to > remove the qi_lb60 board support to be legally clean. > > Sorry for the inconvenience, but obviously this issue slipped through > at the initial review of the code... > > [1] http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/164965 No answer since > one week. Should we revert this for v2013.07, then? Best regards Dirk [1] http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=3c945542dad99b1ec4a324ad6b69b8de8829827b