From mboxrd@z Thu Jan  1 00:00:00 1970
From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Fri, 19 Jul 2013 14:34:55 -0700
Subject: [U-Boot] [PATCH 1/1] ddr cfg: DRAM_RESET needs 0x00020030
In-Reply-To: <CAOMZO5DvVEk+oF90yoHCNC1fx_Pp1jnFD9bTWD_WbU2=1C9V6A@mail.gmail.com>
References: <1374090375-21216-1-git-send-email-troy.kisky@boundarydevices.com>
	<CAOMZO5DvVEk+oF90yoHCNC1fx_Pp1jnFD9bTWD_WbU2=1C9V6A@mail.gmail.com>
Message-ID: <51E9B0FF.40102@boundarydevices.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 7/19/2013 2:00 PM, Fabio Estevam wrote:
> Hi Troy,
>
> On Wed, Jul 17, 2013 at 4:46 PM, Troy Kisky
> <troy.kisky@boundarydevices.com> wrote:
>> The old value of 0x000e0030 will cause ethernet
>> timeout issues on the sabrelite and possibly other
>> boards using the KSZ9021.
>> I have no explanation as to why.
>>
>> But this is a correct change, the TRM will be updated
>> to show that 00b is the only valid setting for bits
>> 19-18 of DRAM_RESET.
>>
>> My thanks go to Liu Hui(Jason) for this information.
>>
>> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
> Should this go into 2013.07?
>

If not too late. It only affect Nitrogen6x, at least until Sabrelite is 
combined with it.
And Sabrelite is already using this value.

Troy