From mboxrd@z Thu Jan 1 00:00:00 1970 From: Eric Nelson Date: Fri, 26 Jul 2013 09:12:35 -0700 Subject: [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x In-Reply-To: <51F28BE3.6010607@denx.de> References: <1374849437-4805-1-git-send-email-festevam@gmail.com> <51F28BE3.6010607@denx.de> Message-ID: <51F29FF3.3080605@boundarydevices.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Thanks Stefano, On 07/26/2013 07:46 AM, Stefano Babic wrote: > Hi Fabio, > > On 26/07/2013 16:37, Fabio Estevam wrote: >> From: Fabio Estevam >> >> mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's avoid the >> code duplication and only use the nitrogen6x source code to make board code >> maintainance easier. >> >> Tested booting a mainline device tree kernel on a mx6qsabrelite board. >> >> Signed-off-by: Fabio Estevam >> --- > > Thanks, no corruption at all - and as the new version differs only for > the mail format, there is no need to wait for inclusion. > > Applied to u-boot-imx, thanks ! > Do we now need updated patches from Pardeep and Robert, who have patches pending that include changes to board/freescale/mx6qsabrelite/? Please advise, Eric