[U-Boot] [PATCH v2] imx: nitrogen6x: mx6qsabrelite: Add support for DVI monitors

[Stefano Babic <sbabic@denx.de>]

On 24/07/2013 00:07, Robert Winkler wrote:
> A little background is probably appropriate for this patch.
> 
> Since "the beginning" of usage of the SABRE Lite and Nitrogen6x
> boards, DVI detection has been somewhat broken.
> 
> Some (most) DVI monitors don't produce the "HPD" bit in
> the PHY_STAT0 register, but do show proper toggling of the
> RX_SENSE0..3 bits.
> 
> Creating a new the bit-mask to include all five bits and
> modifying the 'hdmidet' command and internal detection
> routines allows these monitors to function properly in U-Boot.
> 
> A related patch to our kernels allows things to work under
> Linux:
>         https://github.com/boundarydevices/linux-imx6/commit/7d8752905c118af9063738a533227de0b2f6ecd4
> 
> Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================