From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Sat, 27 Jul 2013 10:57:05 +0200 Subject: [U-Boot] [PATCH] [PATCH v3] mx6qsabrelite: Remove mx6qsabrelite code in favor of nitrogen6x In-Reply-To: <51F29FF3.3080605@boundarydevices.com> References: <1374849437-4805-1-git-send-email-festevam@gmail.com> <51F28BE3.6010607@denx.de> <51F29FF3.3080605@boundarydevices.com> Message-ID: <51F38B61.7010700@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Eric, On 26/07/2013 18:12, Eric Nelson wrote: > Thanks Stefano, > > On 07/26/2013 07:46 AM, Stefano Babic wrote: >> Hi Fabio, >> >> On 26/07/2013 16:37, Fabio Estevam wrote: >>> From: Fabio Estevam >>> >>> mx6qsabrelite and nitrogen6q boards are hardware compatible, so let's >>> avoid the >>> code duplication and only use the nitrogen6x source code to make >>> board code >>> maintainance easier. >>> >>> Tested booting a mainline device tree kernel on a mx6qsabrelite board. >>> >>> Signed-off-by: Fabio Estevam >>> --- >> >> Thanks, no corruption at all - and as the new version differs only for >> the mail format, there is no need to wait for inclusion. >> >> Applied to u-boot-imx, thanks ! >> > > Do we now need updated patches from Pardeep and Robert, who have > patches pending that include changes to board/freescale/mx6qsabrelite/? No need - I fixed it myself and applied. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================