From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefano Babic <sbabic@denx.de>
Date: Fri, 02 Aug 2013 16:43:30 +0200
Subject: [U-Boot] [PATCH V3 00/20] Make mv_udc work for i.mx6
In-Reply-To: <1375399657-25642-1-git-send-email-troy.kisky@boundarydevices.com>
References: <1375399657-25642-1-git-send-email-troy.kisky@boundarydevices.com>
Message-ID: <51FBC592.50101@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Troy,

On 02/08/2013 01:27, Troy Kisky wrote:
> Hi Marek, Stefano
> 
> 
> This series is based on u-boot-usb/master branch.
> After this series, nitrogen6x works with tftpboot to transfer
> files over usb.
> 
> V2 was dropped to my bad posting of it and should be ignored.
> 
> This V3 is a rebase and most patches had to be changed slightly.
> I also ran a ./MAKEALL -a arm and fixed the errors that the V1
> series had.
> 
> The most noticeable change is the addition of
> 
> usb: gadget: mv_udc: fix hardware udc address for i.MX6
> 
> Let me know if you want to go back to a udc variable
> to store the address instead of using hcor.
> 
> 
> Stefano, would you like to take patches 1-5 ?
> I'll likely need a V3, but maybe the early ones
> will be approved.

Fine with me - I merge the first 5 patches.

Regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================