From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jagan Teki <jagannadh.teki@gmail.com>
Date: Wed, 07 Aug 2013 00:26:01 +0530
Subject: [U-Boot] [PATCH 2/3] spi: fsl_espi: Use DIV_ROUND_UP instead of
	open-coded
In-Reply-To: <52014543.4020901@gmail.com>
References: <1373621981.24016.2.camel@phoenix>
	<1373622068.24016.4.camel@phoenix> <52014543.4020901@gmail.com>
Message-ID: <520146C1.2090206@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 07-08-2013 00:19, Jagan Teki wrote:
> On 12-07-2013 15:11, Axel Lin wrote:
>> Use DIV_ROUND_UP to simplify the code.
>>
>> Signed-off-by: Axel Lin <axel.lin@ingics.com>
>> ---
>>   drivers/spi/fsl_espi.c | 6 ++----
>>   1 file changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
>> index 28609ee..e20ab9f 100644
>> --- a/drivers/spi/fsl_espi.c
>> +++ b/drivers/spi/fsl_espi.c
>> @@ -234,15 +234,13 @@ int spi_xfer(struct spi_slave *slave, unsigned
>> int bitlen, const void *data_out,
>>             slave->bus, slave->cs, *(uint *) dout,
>>             dout, *(uint *) din, din, len);
>>
>> -    num_chunks = data_len / max_tran_len +
>> -        (data_len % max_tran_len ? 1 : 0);
>> +    num_chunks = DIV_ROUND_UP(data_len, max_tran_len);
>>       while (num_chunks--) {
>>           if (data_in)
>>               din = buffer + rx_offset;
>>           dout = buffer;
>>           tran_len = min(data_len , max_tran_len);
>> -        num_blks = (tran_len + cmd_len) / 4 +
>> -            ((tran_len + cmd_len) % 4 ? 1 : 0);
>> +        num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
>>           num_bytes = (tran_len + cmd_len) % 4;
>>           fsl->data_len = tran_len + cmd_len;
>>           spi_cs_activate(slave);
>>
>
> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
>
> --
> Thanks,
> Jagan.

Applied to u-boot-spi/master

--
Thanks,
Jagan.