[U-Boot] [PATCH v3 0/5] ARM: at91: atmel_nand: check ONFI ecc minimum requirement

[Josh Wu <josh.wu@atmel.com>]

Hi,

Any feedback for those patch series?

Best Regards,
Josh Wu

On 7/3/2013 11:11 AM, Josh Wu wrote:
> In this patch series, first we make the nand driver can dynamic change sector
> size and ecc correct bits.
> Then we enable ONFI ecc parameters check.
>
> v2 --> v3: use dev_err/info(host->dev) instead of dev_err/info(NULL).
>             use MTDDEBUG instead of pr_debug().
>
> v1 --> v2: Fixes according to Scoot Wood's suggestion
>    - add a new patch which make all driver can use dev_err, dev_info, dev_dbg.
>    - replace all printk to dev_err or dev_info.
>    - fix pmecc data allocate error handler.
>    - fix the pmecc ecc requirement selection, should use <= instead of use <.
>
> Josh Wu (5):
>    ARM: at91: atmel_nand: pmecc driver will select the galois table by
>      sector size
>    ARM: at91: sama5d3: remove unused definition about PMECC alpha table
>      offset
>    linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to
>      compat.h
>    mtd: atmel_nand: alloc memory instead of use static array for pmecc
>      data
>    ARM: at91: atmel_nand: add code to check the ONFI parameter ECC
>      requirement
>
>   arch/arm/include/asm/arch-at91/at91sam9x5.h |    6 +
>   arch/arm/include/asm/arch-at91/sama5d3.h    |    2 -
>   doc/README.atmel_pmecc                      |   14 --
>   drivers/mtd/nand/atmel_nand.c               |  197 +++++++++++++++++++++++++--
>   drivers/usb/musb-new/linux-compat.h         |   16 ---
>   include/configs/at91sam9x5ek.h              |    1 -
>   include/configs/sama5d3xek.h                |    1 -
>   include/linux/compat.h                      |    8 ++
>   8 files changed, 201 insertions(+), 44 deletions(-)
>