[U-Boot] Pull request - arm/zynq v2

[U-Boot] Pull request - arm/zynq v2

[Michal Simek]

Hi Albert,

please pull these 3 zynq patches to your arm tree.

There is still pending the arm: lds: Remove libgcc eabi exception handling tables
patch. Have you considered to also add it?

v2:
- Changed email address,
- There was incorrect rebase which I have fixed - correct sha1 now

Thanks.
Michal


The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:

  nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:

  zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)

----------------------------------------------------------------
Michal Simek (3):
      zynq: Add new ddrc driver for ECC support
      zynq: slcr: Wait 100ms till clk is properly setup
      zynq: Enable axi ethernet and emaclite driver initialization

 arch/arm/cpu/armv7/zynq/Makefile           |  1 +
 arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
 arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
 arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
 board/xilinx/zynq/board.c                  | 19 ++++++++++++
 6 files changed, 80 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130812/013814c9/attachment.pgp>

[U-Boot] Pull request - arm/zynq v2

[Albert ARIBAUD]

Hi Michal,

On Mon, 12 Aug 2013 09:05:00 +0200, Michal Simek <monstr@monstr.eu>
wrote:

> Hi Albert,
> 
> please pull these 3 zynq patches to your arm tree.
> 
> There is still pending the arm: lds: Remove libgcc eabi exception handling tables
> patch. Have you considered to also add it?
> 
> v2:
> - Changed email address,
> - There was incorrect rebase which I have fixed - correct sha1 now
> 
> Thanks.
> Michal
> 
> 
> The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
> 
>   nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-microblaze.git zynq
> 
> for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:
> 
>   zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)
> 
> ----------------------------------------------------------------
> Michal Simek (3):
>       zynq: Add new ddrc driver for ECC support
>       zynq: slcr: Wait 100ms till clk is properly setup
>       zynq: Enable axi ethernet and emaclite driver initialization
> 
>  arch/arm/cpu/armv7/zynq/Makefile           |  1 +
>  arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
>  arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
>  arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
>  arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
>  board/xilinx/zynq/board.c                  | 19 ++++++++++++
>  6 files changed, 80 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c

I cannot merge these three commits without merging a lot of nds32 stuff
too, apparently, and I don't want to. If this stuff is not needed for
the three commits, then please rebase them so that they don't pull
anything else in.

Amicalement,
-- 
Albert.

[U-Boot] Pull request - arm/zynq v2

[Tom Rini]

On Sat, Aug 17, 2013 at 05:42:22PM +0200, Albert ARIBAUD wrote:

> Hi Michal,
> 
> On Mon, 12 Aug 2013 09:05:00 +0200, Michal Simek <monstr@monstr.eu>
> wrote:
> 
> > Hi Albert,
> > 
> > please pull these 3 zynq patches to your arm tree.
> > 
> > There is still pending the arm: lds: Remove libgcc eabi exception handling tables
> > patch. Have you considered to also add it?
> > 
> > v2:
> > - Changed email address,
> > - There was incorrect rebase which I have fixed - correct sha1 now
> > 
> > Thanks.
> > Michal
> > 
> > 
> > The following changes since commit a78dac79ede7fbb4c9e816abc879655540c3f076:
> > 
> >   nds32: fix the missing COBJS-y change (2013-08-09 01:51:24 +0800)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-microblaze.git zynq
> > 
> > for you to fetch changes up to 2d83d33a51926d6471eb9282d03d83783850d565:
> > 
> >   zynq: Enable axi ethernet and emaclite driver initialization (2013-08-12 08:59:56 +0200)
> > 
> > ----------------------------------------------------------------
> > Michal Simek (3):
> >       zynq: Add new ddrc driver for ECC support
> >       zynq: slcr: Wait 100ms till clk is properly setup
> >       zynq: Enable axi ethernet and emaclite driver initialization
> > 
> >  arch/arm/cpu/armv7/zynq/Makefile           |  1 +
> >  arch/arm/cpu/armv7/zynq/ddrc.c             | 50 ++++++++++++++++++++++++++++++
> >  arch/arm/cpu/armv7/zynq/slcr.c             |  2 +-
> >  arch/arm/include/asm/arch-zynq/hardware.h  |  8 +++++
> >  arch/arm/include/asm/arch-zynq/sys_proto.h |  1 +
> >  board/xilinx/zynq/board.c                  | 19 ++++++++++++
> >  6 files changed, 80 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/cpu/armv7/zynq/ddrc.c
> 
> I cannot merge these three commits without merging a lot of nds32 stuff
> too, apparently, and I don't want to. If this stuff is not needed for
> the three commits, then please rebase them so that they don't pull
> anything else in.

Alternatively, can I get a pull request for nds32?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130818/216a01f8/attachment.pgp>