From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC
Date: Tue, 13 Aug 2013 17:52:33 +0900 [thread overview]
Message-ID: <5209F3D1.4010406@samsung.com> (raw)
In-Reply-To: <51E8FC81.40209@samsung.com>
Dear Pantelis,
Welcome to take care of u-boot-mmc.
Could you merge this patch?
Best Regards,
Jaehoon Chung
On 07/19/2013 05:44 PM, Jaehoon Chung wrote:
> Samsung SoC is supported the WIDE8, even if Controller version is v2.0.
> So add the SDHCI_QUIRK_USE_WIDE8 for Samsung-SoC.
>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> ---
> drivers/mmc/s5p_sdhci.c | 4 +++-
> drivers/mmc/sdhci.c | 13 +++++++------
> include/sdhci.h | 3 +++
> 3 files changed, 13 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index e50ff92..97e153e 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -84,7 +84,7 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
>
> host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
> SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
> - SDHCI_QUIRK_WAIT_SEND_CMD;
> + SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
> host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
> host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
>
> @@ -93,6 +93,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
> host->index = index;
>
> host->host_caps = MMC_MODE_HC;
> + if (bus_width == 8)
> + host->host_caps |= MMC_MODE_8BIT;
>
> return add_sdhci(host, 52000000, 400000);
> }
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index c5631bf..9bf3052 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -270,7 +270,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
> if (clock == 0)
> return 0;
>
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
> /* Version 3.00 divisors must be a multiple of 2. */
> if (mmc->f_max <= clock)
> div = 1;
> @@ -363,10 +363,11 @@ void sdhci_set_ios(struct mmc *mmc)
> ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> if (mmc->bus_width == 8) {
> ctrl &= ~SDHCI_CTRL_4BITBUS;
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
> + (host->quirks & SDHCI_QUIRK_USE_WIDE8))
> ctrl |= SDHCI_CTRL_8BITBUS;
> } else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> ctrl &= ~SDHCI_CTRL_8BITBUS;
> if (mmc->bus_width == 4)
> ctrl |= SDHCI_CTRL_4BITBUS;
> @@ -453,7 +454,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> if (max_clk)
> mmc->f_max = max_clk;
> else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
> >> SDHCI_CLOCK_BASE_SHIFT;
> else
> @@ -468,7 +469,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> if (min_clk)
> mmc->f_min = min_clk;
> else {
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
> mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
> else
> mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;
> @@ -486,7 +487,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
> mmc->voltages |= host->voltages;
>
> mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
> - if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
> + if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
> if (caps & SDHCI_CAN_DO_8BIT)
> mmc->host_caps |= MMC_MODE_8BIT;
> }
> diff --git a/include/sdhci.h b/include/sdhci.h
> index cffbe53..f3f8219 100644
> --- a/include/sdhci.h
> +++ b/include/sdhci.h
> @@ -208,6 +208,8 @@
> #define SDHCI_SPEC_200 1
> #define SDHCI_SPEC_300 2
>
> +#define SDHCI_GET_VERSION(x) (x->version & SDHCI_SPEC_VER_MASK)
> +
> /*
> * End of controller registers.
> */
> @@ -226,6 +228,7 @@
> #define SDHCI_QUIRK_NO_CD (1 << 5)
> #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6)
> #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1 << 7)
> +#define SDHCI_QUIRK_USE_WIDE8 (1 << 8)
>
> /* to make gcc happy */
> struct sdhci_host;
>
next prev parent reply other threads:[~2013-08-13 8:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-19 8:44 [U-Boot] [PATCH] mmc: sdhci: use the SDHCI_QUIRK_USE_WIDE8 for samsung SoC Jaehoon Chung
2013-08-13 8:52 ` Jaehoon Chung [this message]
2013-08-13 9:01 ` Pantelis Antoniou
2013-08-13 11:37 ` Jaehoon Chung
2013-09-05 18:09 ` Pantelis Antoniou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5209F3D1.4010406@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox