From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot, v1, 6/8] net/fman: add a fm_enable_port function
Date: Tue, 13 Aug 2013 13:38:05 -0700 [thread overview]
Message-ID: <520A992D.8010700@freescale.com> (raw)
In-Reply-To: <1374832955-4544-7-git-send-email-valentin.longchamp@keymile.com>
On 07/26/2013 03:02 AM, Valentin Longchamp wrote:
> This can be useful if we want to disable an interface in u-boot and
> later reenable them, so that it looks available when trying to fix the
> FDT or for the kernel.
>
> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
>
> ---
> drivers/net/fm/init.c | 7 +++++++
> include/fm_eth.h | 1 +
> 2 files changed, 8 insertions(+)
>
> diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
> index 5908c32..820277e 100644
> --- a/drivers/net/fm/init.c
> +++ b/drivers/net/fm/init.c
> @@ -158,6 +158,13 @@ void fm_disable_port(enum fm_port port)
> fman_disable_port(port);
> }
>
> +void fm_enable_port(enum fm_port port)
> +{
> + int i = fm_port_to_index(port);
> +
> + fm_info[i].enabled = 1;
> +}
> +
> void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
> {
> int i = fm_port_to_index(port);
> diff --git a/include/fm_eth.h b/include/fm_eth.h
> index 8fcf172..b464e04 100644
> --- a/include/fm_eth.h
> +++ b/include/fm_eth.h
> @@ -162,5 +162,6 @@ void fm_info_set_phy_address(enum fm_port port, int address);
> int fm_info_get_phy_address(enum fm_port port);
> void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus);
> void fm_disable_port(enum fm_port port);
> +void fm_enable_port(enum fm_port port);
>
Is this function called somewhere?
York
next prev parent reply other threads:[~2013-08-13 20:38 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 10:02 [U-Boot] [PATCH v1 0/8] Support for the kmp204x reference design Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 1/8] km-powerpc: move SYS_MALLOC_LEN out of keymile-common.h Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 2/8] km-powerpc: move CONFIG_FLASH_CFI_MTD to km83xx-common.h Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 3/8] KM: fix typo in default environment Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 4/8] mpc8xxx: set x2 DDR3 refresh rate if SPD config requires it Valentin Longchamp
2013-08-13 20:24 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:25 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 5/8] fsl: do not define FSL_SRIO_PCIE_BOOT_MASTER for all P2041 systems Valentin Longchamp
2013-08-13 20:32 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:26 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 6/8] net/fman: add a fm_enable_port function Valentin Longchamp
2013-08-13 20:38 ` York Sun [this message]
2013-08-19 15:28 ` [U-Boot] [U-Boot, v1, " Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 7/8] mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into accout Valentin Longchamp
2013-08-13 20:54 ` Scott Wood
2013-08-19 15:34 ` Valentin Longchamp
2013-07-26 10:02 ` [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
2013-08-13 21:38 ` Scott Wood
2013-08-19 15:50 ` Valentin Longchamp
2013-08-20 0:48 ` Scott Wood
2013-08-20 1:02 ` York Sun
2013-08-20 18:20 ` Scott Wood
2013-08-20 18:21 ` Scott Wood
2013-08-20 19:40 ` York Sun
2013-08-20 19:47 ` Scott Wood
2013-08-20 19:57 ` York Sun
2013-08-20 20:03 ` Scott Wood
2013-08-20 20:26 ` York Sun
2013-08-20 23:24 ` [U-Boot] [RFC PATCH 1/1] powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100 Scott Wood
2013-08-20 6:28 ` [U-Boot] [PATCH v1 8/8] mpc85xx: introduce the kmp204x reference design support Valentin Longchamp
2013-08-20 18:18 ` Scott Wood
2013-08-21 6:36 ` Valentin Longchamp
2013-08-21 23:11 ` Scott Wood
2013-08-13 21:44 ` [U-Boot] [U-Boot, v1, " York Sun
2013-08-19 15:51 ` Valentin Longchamp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520A992D.8010700@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox