From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import
Date: Wed, 14 Aug 2013 09:48:11 -0400 [thread overview]
Message-ID: <520B8A9B.6080808@ti.com> (raw)
In-Reply-To: <B3A295C5BD5B13458B2F5C6AFAD910460A2FD94D@039-SN2MPN1-022.039d.mgd.msft.net>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 08/13/2013 10:31 PM, Zhang Ying-B40530 wrote:
> Hi, Tom, This patch hasn't been applied? I think it should be
> applied early and it is needed by other patches of this set.
> Thanks.
I expect that as part of the overall series, once ready, York will
take this and include it in his pull request, which is why I've given
it my acked-by.
>
> -----Original Message----- From: Tom Rini
> [mailto:tom.rini at gmail.com] On Behalf Of Tom Rini Sent: Friday,
> June 28, 2013 5:57 AM To: Wood Scott-B07421 Cc:
> u-boot at lists.denx.de; Wood Scott-B07421; afleming at gmail.com; Zhang
> Ying-B40530 Subject: Re: [U-Boot] [PATCH 06/10 v5] spl:
> env_common.c: make CONFIG_SPL_BUILD contain function env_import
>
> On Thu, Jun 27, 2013 at 03:16:34PM -0500, Scott Wood wrote:
>> On 06/27/2013 07:17:48 AM, Tom Rini wrote:
>>> On Thu, Jun 27, 2013 at 02:35:34AM +0000, Zhang Ying-B40530
>>> wrote:
>>>
>>>> -----Original Message----- From: Tom Rini
>>>> [mailto:tom.rini at gmail.com] On Behalf Of Tom Rini
>>> [snip]
>>>> Building for am335x_evm and am335x_evm_usbspl should tell you
>>>> if
>>> it is,
>>>> or is not. Whacking network support into SPL required more
>>>> than --gc-sections alone could give us and we needed to drop
>>>> a few couldn't-ever-reach calls and functionality out. [Zhang
>>>> Ying] Yes, I tried to build for am335x_evm without this
>>>> ifdef, no problem. Whether it can be removed?
>>>
>>> Did you also build am335x_evm_usbspl?
>>
>> It builds OK for me with the ifdef removed. It adds 81 bytes to
>> the SPL.
>
> I think we can live with that.
>
> Acked-by: Tom Rini <trini@ti.com>
>
> -- Tom
>
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=tuhI
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2013-08-14 13:48 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 8:04 [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 02/10 v5] powerpc/mpc85xx: modify the functionality clear_bss and aligning the end address of the BSS ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 03/10 v5] common/Makefile: Add new symbol CONFIG_SPL_ENV_SUPPORT for environment in SPL ying.zhang at freescale.com
2013-06-27 22:03 ` Tom Rini
2013-06-27 22:19 ` Andy Fleming
2013-06-20 8:04 ` [U-Boot] [PATCH 04/10 v5] Makefile: move the common makefile line to public area ying.zhang at freescale.com
2013-06-27 22:02 ` Tom Rini
2013-06-20 8:04 ` [U-Boot] [PATCH 05/10 v5] powerpc: deleted unused symbol CONFIG_SPL_NAND_MINIMAL and enabled some functionality for common SPL ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import ying.zhang at freescale.com
2013-06-21 5:37 ` Wolfgang Denk
[not found] ` <B3A295C5BD5B13458B2F5C6AFAD91046723AB8@039-SN2MPN1-021.039d.mgd.msft.net>
2013-06-26 16:12 ` Scott Wood
2013-06-26 17:34 ` Tom Rini
2013-06-27 2:35 ` Zhang Ying-B40530
2013-06-27 12:17 ` Tom Rini
2013-06-27 20:16 ` Scott Wood
2013-06-27 21:56 ` Tom Rini
2013-07-09 9:59 ` Zhang Ying-B40530
2013-08-14 2:31 ` Zhang Ying-B40530
2013-08-14 13:48 ` Tom Rini [this message]
2013-08-14 15:42 ` York Sun
2013-08-15 2:25 ` Zhang Ying-B40530
2013-08-15 2:42 ` sun york-R58495
2013-08-15 2:48 ` Zhang Ying-B40530
2013-08-20 17:06 ` York Sun
2013-06-20 8:04 ` [U-Boot] [PATCH 07/10 v5] powerpc/p1022ds: boot from SD Card with SPL ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 08/10 v5] powerpc/p1022ds: boot from spi flash " ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 09/10 v5] nand: tpl : introduce the TPL based on the SPL ying.zhang at freescale.com
2013-06-20 8:04 ` [U-Boot] [PATCH 10/10 v5] powerpc: p1022ds: support TPL on the P1022DS ying.zhang at freescale.com
2013-06-21 5:36 ` [U-Boot] [PATCH 01/10 v5] powerpc/mpc85xx: support application without resetvec segment in the linker script Wolfgang Denk
2013-06-27 22:01 ` Tom Rini
2013-06-27 22:16 ` Andy Fleming
-- strict thread matches above, loose matches on Subject: below --
2013-06-21 7:14 [U-Boot] [PATCH 06/10 v5] spl: env_common.c: make CONFIG_SPL_BUILD contain function env_import Zhang Ying-B40530
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520B8A9B.6080808@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox