[U-Boot] [PATCH v2 0/7] The patchset fixes some issue in the generation of the imx image

[Stefano Babic <sbabic@denx.de>]

Hio Otavio,

On 12/08/2013 17:23, Otavio Salvador wrote:
> On Mon, Aug 12, 2013 at 11:39 AM, Stefano Babic <sbabic@denx.de> wrote:
> ...
>> The patchset allows to add to the imx Header the CSF (command Sequence File)
>> generated by the tools provided by Freescale. The CSF is then simply concatenated
>> to the u-boot image, making a signed bootloader, that the processor can verify
>> if the fuses for the keys are burned. The processor (i.MX53 / i.MX6x) will not
>> start a bootloader that cannot be verified - further infos how to configure
>> the SOC to verify the bootloader can be found in the User Manual of the specific
>> SOC.
> ...
> 
> Couldn't a brief 'how-to' to be added to the README

I do not thnk so, because it will be a duplication of documentation
already provided by the manufacturer.

> and also the
> pointers to the documents where this is documented?

Maybe I should point out in which document this stuff is covered.
Freescale can move the link (I find a link for each processor on the
Freescale's website). Something like "can be found in the "High
Assurance Boot Version Application Priogramming Interface Reference
Manual" as part of the Freescale Code Signing Tool, available on the
manufacturer's website ?"

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================