From: Dirk Behme <dirk.behme@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Enabling L2 cache on mx53
Date: Mon, 19 Aug 2013 17:16:00 +0200 [thread overview]
Message-ID: <521236B0.5000403@gmail.com> (raw)
In-Reply-To: <CAOMZO5AgrSqkjjfg-e6QUx2c61C7-jmpn=uJFdwvOoBCVcAT1Q@mail.gmail.com>
Am 19.08.2013 15:55, schrieb Fabio Estevam:
> Hi,
>
> I notice slow tftp transfer on mx53qsb and I suspected it could be due
> to L2 cache being disabled.
>
> Tried enabling with:
>
> --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> @@ -45,6 +45,11 @@
> #endif
>
> mcr 15, 1, r0, c9, c0, 2
> +
> + /* enable L2 cache */
> + mrc 15, 0, r0, c1, c0, 1
> + orr r0, r0, #(1 << 1) /* enable l2 cache */
> + mcr 15, 0, r0, c1, c0, 1
> .endm /* init_l2cc */
>
> /* AIPS setup - Only setup MPROTx registers.
>
>
> ,but still see the same low tftp throughput (720 kB/s - on mx28 I see
> the double rate).
>
> Any suggestions as to how properly enable L2 cache on mx53?
Is the mx53 L2 cache the same like on mx6?
If so, besides enabling it, it needs a proper configuration. Have a
look to
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=5a5ca56e057d206db13461b84a7da3a3543e1206
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=b3a9c315378ff811bf34393f2f0a6e8b9ffced3b
Best regards
Dirk
next prev parent reply other threads:[~2013-08-19 15:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-19 13:55 [U-Boot] Enabling L2 cache on mx53 Fabio Estevam
2013-08-19 15:16 ` Dirk Behme [this message]
2013-08-19 15:22 ` Fabio Estevam
2013-08-19 19:51 ` Marek Vasut
2013-08-19 20:26 ` Fabio Estevam
2013-08-19 20:31 ` Marek Vasut
2013-08-20 7:21 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521236B0.5000403@gmail.com \
--to=dirk.behme@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox