[U-Boot] [PATCH] powerpc/p1010rdb: remove CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK

[York Sun <yorksun@freescale.com>]

On 08/14/2013 06:45 PM, Shengzhou Liu wrote:
> CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK was needed only on
> obsolete P1010RDB Rev.B non-formal board, not reproduced on
> P1010RDB Rev.C and new P1010RDB-PB, now it's no longer needed.
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
> ---
>  arch/powerpc/include/asm/config_mpc85xx.h | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
> index e5dee85..dfb2d17 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -139,7 +139,6 @@
>  #define CONFIG_TSECV2
>  #define CONFIG_SYS_FSL_SEC_COMPAT	4
>  #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
> -#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
>  #define CONFIG_NUM_DDR_CONTROLLERS	1
>  #define CONFIG_SYS_FSL_NUM_USB_CTRLS	1
>  #define CONFIG_SYS_FSL_IFC_BANK_COUNT	4
> 

Shengzhou,

Please check your patch and rebase to latest master if necessary. I
cannot find CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK for P1010RDB. It
does show up for BSC9132 but I doubt that is what you are trying to remove.

York