[U-Boot] [PATCH 3/7 v11] powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL

[York Sun <yorksun@freescale.com>]

On 08/16/2013 12:16 AM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530@freescale.com>
> 
> Enable p1022ds to start from eSDHC with SPL.
> 
> Signed-off-by: Ying Zhang <b40530@freescale.com>
> ---
> Change from v10:
> - Fix the warning from spl.c.
> Change from v9:
> - Mofidy board/freescale/p1022ds/spl.c, fix checkpatch warnings.
> Change from v8:
> - No change.
> Change from v7:
> - No change.
> Change from v6:
> - Split from the patch "powerpc/p1022ds: boot from SD Card with SPL".
> - this patch only enables p1022ds to boot from SD Card with SPL.
> Change from v5:
> - No change.
> Change from v4:
> - No change.
> Change from v3:
> - No change.
> Change from v2:
> - No change.
> Change from v1:
> - No change.
> 
>  README                           |    4 ++
>  board/freescale/common/Makefile  |    2 -
>  board/freescale/p1022ds/Makefile |    3 +
>  board/freescale/p1022ds/spl.c    |  110 ++++++++++++++++++++++++++++++++++++++
>  board/freescale/p1022ds/tlb.c    |   23 +++++---
>  include/configs/P1022DS.h        |   54 ++++++++++++++++---
>  6 files changed, 179 insertions(+), 17 deletions(-)
>  create mode 100644 board/freescale/p1022ds/spl.c
> 

Applied to u-boot-mpc85xx.git.

York