[U-Boot] [PATCH 7/7 v11] powerpc: p1022ds: add TPL for p1022ds nand boot

[York Sun <yorksun@freescale.com>]

On 08/16/2013 12:16 AM, ying.zhang at freescale.com wrote:
> From: Ying Zhang <b40530@freescale.com>
> 
> TPL is introduced in the patch "NAND: TPL : introduce the TPL
> based on the SPL", here enable TPL for p1022ds nand boot.
> 
> Signed-off-by: Ying Zhang <b40530@freescale.com>
> ---
> Change from v10:
> - No change.
> Change from v9:
> - Modify drivers/mtd/nand/Makefile.
> - Modify drivers/mtd/nand/fsl_elbc_spl.c.
> - Modify include/configs/P1022DS.h, fix checkpatch warnings.
> Change from v8:
> - Add new symbol CONFIG_SPL_ENV_IN_NAND.
> Change from v7:
> - No change.
> Change from v6:
> - Delete the file "board/freescale/p1022ds/tpl.c".
> - Reuse the file "board/freescale/p1022ds/spl.c" in the TPL.
> Change from v5:
> - Change functionality nand_load_image to nand_load, it is called in TPL.
> Change from v4:
> - No change.
> Change from v3:
> - No change.
> Change from v2:
> - No change.
> Change from v1:
> - Split from "powerpc/p1022ds: nand: introduce the TPL based on the SPL".
> 
>  board/freescale/p1022ds/spl.c         |   16 +++++++
>  board/freescale/p1022ds/spl_minimal.c |   53 ++--------------------
>  drivers/mtd/nand/Makefile             |    1 +
>  drivers/mtd/nand/fsl_elbc_spl.c       |   27 +++++++++---
>  include/configs/P1022DS.h             |   77 ++++++++++++++++++++++++++-------
>  5 files changed, 103 insertions(+), 71 deletions(-)
> 
Applied to u-boot-mpc85xx.git.

York