[U-Boot] [PATCH] i.MX6: nitrogen6x: force HDMI onto IPU0/DI0

[Stefano Babic <sbabic@denx.de>]

Hi Eric,

On 20/08/2013 20:44, Eric Nelson wrote:
> Our Linux kernel switches the HDMI connector onto IPU0/DI1,
> but the U-Boot display driver only supports IPU0/DI0 for the
> time being.
> 
> Because of this, a soft re-boot will leave the HDMI output
> connected to the wrong display port and prevent video from
> being displayed.
> 
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---
>  board/boundary/nitrogen6x/nitrogen6x.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
> index 79ab449..1419f36 100644
> --- a/board/boundary/nitrogen6x/nitrogen6x.c
> +++ b/board/boundary/nitrogen6x/nitrogen6x.c
> @@ -666,7 +666,8 @@ static void setup_display(void)
>  	writel(reg, &iomux->gpr[2]);
>  
>  	reg = readl(&iomux->gpr[3]);
> -	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
> +	reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
> +			|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
>  	    | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
>  	       <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
>  	writel(reg, &iomux->gpr[3]);
> 

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================