From mboxrd@z Thu Jan  1 00:00:00 1970
From: Mark Jackson <mpfj-list@newflow.co.uk>
Date: Wed, 21 Aug 2013 15:20:57 +0100
Subject: [U-Boot] [PATCH v4] Add Nanobone board support
In-Reply-To: <520B4CE1.6050805@newflow.co.uk>
References: <520B4CE1.6050805@newflow.co.uk>
Message-ID: <5214CCC9.9020402@newflow.co.uk>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 14/08/13 10:24, Mark Jackson wrote:
> NanoBone Specification:
> -----------------------
> CPU:
>   TI AM335x
> 
> Memory:
>   256MB DDR3
>   64MB NOR flash
>   256MB NAND flash
>   128KB FRAM
> 
> Ethernet:
>   2 x 10/100 connected to SMSC LAN8710 PHY
> 
> USB:
>   1 x USB2.0 Type A
> 
> I2C:
>   2Kbit EEPROM (Microchip 24AA02)
>   RTC (Maxim DS1338)
>   GPIO Expander (Microchip MCP23017)
> 
> Expansion connector:
>   6 x UART
>   1 x MMC/SD
>   1 x USB2.0
> 
> Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>

Any comments on this board support patch ?