From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code
Date: Wed, 28 Aug 2013 19:11:33 +0900 [thread overview]
Message-ID: <521DCCD5.1020307@samsung.com> (raw)
In-Reply-To: <1376342108-319-2-git-send-email-l.majewski@majess.pl>
Dear Lukasz,
On 13/08/13 06:15, Lukasz Majewski wrote:
> This commit brings removal of duplicated code for UART IP block embedded
> at Samsung SoCs.
> New include/asm/samsung-common directory has been created to store
> common code for existing and future Samsung targets.
>
> Moreover building of UART code now depends on more verbose CONFIG_S5P_SERIAL.
> Thereof all relevant boards configs have been adjusted.
>
> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
>
> ---
> Changes for v3:
> - Comply with SPDX license format
>
> Changes for v2:
> - Remove S3C64XX define from the code
> ---
> arch/arm/include/asm/arch-exynos/uart.h | 44 -------------------
> arch/arm/include/asm/arch-s5pc1xx/uart.h | 44 -------------------
> arch/arm/include/asm/samsung-common/uart.h | 64 ++++++++++++++++++++++++++++
> drivers/serial/Makefile | 2 +-
> drivers/serial/serial_s5p.c | 13 +-----
> include/configs/exynos5250-dt.h | 1 +
> include/configs/origen.h | 1 +
> include/configs/s5p_goni.h | 1 +
> include/configs/s5pc210_universal.h | 1 +
> include/configs/smdkc100.h | 1 +
> include/configs/smdkv310.h | 1 +
> include/configs/trats.h | 1 +
> 12 files changed, 74 insertions(+), 100 deletions(-)
> delete mode 100644 arch/arm/include/asm/arch-exynos/uart.h
> delete mode 100644 arch/arm/include/asm/arch-s5pc1xx/uart.h
> create mode 100644 arch/arm/include/asm/samsung-common/uart.h
>
> diff --git a/arch/arm/include/asm/arch-exynos/uart.h b/arch/arm/include/asm/arch-exynos/uart.h
> deleted file mode 100644
> index 33d6ba3..0000000
> --- a/arch/arm/include/asm/arch-exynos/uart.h
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -/*
> - * (C) Copyright 2009 Samsung Electronics
> - * Minkyu Kang <mk7.kang@samsung.com>
> - * Heungjun Kim <riverful.kim@samsung.com>
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#ifndef __ASM_ARCH_UART_H_
> -#define __ASM_ARCH_UART_H_
> -
> -#ifndef __ASSEMBLY__
> -/* baudrate rest value */
> -union br_rest {
> - unsigned short slot; /* udivslot */
> - unsigned char value; /* ufracval */
> -};
> -
> -struct s5p_uart {
> - unsigned int ulcon;
> - unsigned int ucon;
> - unsigned int ufcon;
> - unsigned int umcon;
> - unsigned int utrstat;
> - unsigned int uerstat;
> - unsigned int ufstat;
> - unsigned int umstat;
> - unsigned char utxh;
> - unsigned char res1[3];
> - unsigned char urxh;
> - unsigned char res2[3];
> - unsigned int ubrdiv;
> - union br_rest rest;
> - unsigned char res3[0xffd0];
> -};
> -
> -static inline int s5p_uart_divslot(void)
> -{
> - return 0;
> -}
> -
> -#endif /* __ASSEMBLY__ */
> -
> -#endif
> diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h
> deleted file mode 100644
> index 26db098..0000000
> --- a/arch/arm/include/asm/arch-s5pc1xx/uart.h
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -/*
> - * (C) Copyright 2009 Samsung Electronics
> - * Minkyu Kang <mk7.kang@samsung.com>
> - * Heungjun Kim <riverful.kim@samsung.com>
> - *
> - * SPDX-License-Identifier: GPL-2.0+
> - */
> -
> -#ifndef __ASM_ARCH_UART_H_
> -#define __ASM_ARCH_UART_H_
> -
> -#ifndef __ASSEMBLY__
> -/* baudrate rest value */
> -union br_rest {
> - unsigned short slot; /* udivslot */
> - unsigned char value; /* ufracval */
> -};
> -
> -struct s5p_uart {
> - unsigned int ulcon;
> - unsigned int ucon;
> - unsigned int ufcon;
> - unsigned int umcon;
> - unsigned int utrstat;
> - unsigned int uerstat;
> - unsigned int ufstat;
> - unsigned int umstat;
> - unsigned char utxh;
> - unsigned char res1[3];
> - unsigned char urxh;
> - unsigned char res2[3];
> - unsigned int ubrdiv;
> - union br_rest rest;
> - unsigned char res3[0x3d0];
> -};
> -
> -static inline int s5p_uart_divslot(void)
> -{
> - return 1;
> -}
> -
> -#endif /* __ASSEMBLY__ */
> -
> -#endif
> diff --git a/arch/arm/include/asm/samsung-common/uart.h b/arch/arm/include/asm/samsung-common/uart.h
> new file mode 100644
> index 0000000..ce92399
> --- /dev/null
> +++ b/arch/arm/include/asm/samsung-common/uart.h
> @@ -0,0 +1,64 @@
> +/*
> + * (C) Copyright 2009 Samsung Electronics
> + * Minkyu Kang <mk7.kang@samsung.com>
> + * Heungjun Kim <riverful.kim@samsung.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __ASM_ARCH_UART_H_
> +#define __ASM_ARCH_UART_H_
> +
> +#ifndef __ASSEMBLY__
> +/* baudrate rest value */
> +union br_rest {
> + unsigned short slot; /* udivslot */
> + unsigned char value; /* ufracval */
> +};
> +
> +struct s5p_uart {
> + unsigned int ulcon;
> + unsigned int ucon;
> + unsigned int ufcon;
> + unsigned int umcon;
> + unsigned int utrstat;
> + unsigned int uerstat;
> + unsigned int ufstat;
> + unsigned int umstat;
> + unsigned char utxh;
> + unsigned char res1[3];
> + unsigned char urxh;
> + unsigned char res2[3];
> + unsigned int ubrdiv;
> + union br_rest rest;
> +#if defined(CONFIG_S5PC100) || defined(CONFIG_S5PC110)
OK. I understood your patch's concept and patch looks good.
But, we have not been allowed ifdef at our SoCs.
So, I can't accept your patch easily.
How you think?
Do we really need to combine headers?
I agree that they are almost duplicate codes.
But I thinks it's not a redundant.
> + unsigned char res3[0x3d0];
> +#else /* Exynos 4 and 5 */
> + unsigned char res3[0xffd0];
> +#endif
> +};
> +
> +
> +static inline int s5p_uart_divslot(void)
> +{
> +#if defined(CONFIG_S5PC100) || defined(CONFIG_S5PC110)
> + return 1;
> +#else /* Exynos 4 and 5 */
> + return 0;
> +#endif
> +}
> +
> +#define RX_FIFO_COUNT_MASK 0xff
> +#define RX_FIFO_FULL_MASK (1 << 8)
> +#define TX_FIFO_FULL_MASK (1 << 24)
> +
> +/* Information about a serial port */
> +struct fdt_serial {
> + u32 base_addr; /* address of registers in physical memory */
> + u8 port_id; /* uart port number */
> + u8 enabled; /* 1 if enabled, 0 if disabled */
> +};
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 697f2bb..e3ca49a 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -19,7 +19,7 @@ COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
> COBJS-$(CONFIG_MCFUART) += mcfuart.o
> COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
> COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
> -COBJS-$(CONFIG_S5P) += serial_s5p.o
> +COBJS-$(CONFIG_S5P_SERIAL) += serial_s5p.o
> COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
> COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
> COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
> diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
> index f98b422..be08925 100644
> --- a/drivers/serial/serial_s5p.c
> +++ b/drivers/serial/serial_s5p.c
> @@ -12,22 +12,13 @@
> #include <fdtdec.h>
> #include <linux/compiler.h>
> #include <asm/io.h>
> -#include <asm/arch/uart.h>
> +#include <asm/samsung-common/uart.h>
> #include <asm/arch/clk.h>
> #include <serial.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> -#define RX_FIFO_COUNT_MASK 0xff
> -#define RX_FIFO_FULL_MASK (1 << 8)
> -#define TX_FIFO_FULL_MASK (1 << 24)
> -
> -/* Information about a serial port */
> -struct fdt_serial {
> - u32 base_addr; /* address of registers in physical memory */
> - u8 port_id; /* uart port number */
> - u8 enabled; /* 1 if enabled, 0 if disabled */
> -} config __attribute__ ((section(".data")));
> +struct fdt_serial config __attribute__ ((section(".data")));
>
> static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
> {
> diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
> index 8f8f85f..a759d07 100644
> --- a/include/configs/exynos5250-dt.h
> +++ b/include/configs/exynos5250-dt.h
> @@ -69,6 +69,7 @@
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
>
> /* select serial console configuration */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_BAUDRATE 115200
> #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
> #define CONFIG_SILENT_CONSOLE
> diff --git a/include/configs/origen.h b/include/configs/origen.h
> index da13574..a59419d 100644
> --- a/include/configs/origen.h
> +++ b/include/configs/origen.h
> @@ -48,6 +48,7 @@
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
>
> /* select serial console configuration */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL2 1 /* use SERIAL 2 */
> #define CONFIG_BAUDRATE 115200
> #define EXYNOS4_DEFAULT_UART_OFFSET 0x020000
> diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
> index d0fafd7..812b7f3 100644
> --- a/include/configs/s5p_goni.h
> +++ b/include/configs/s5p_goni.h
> @@ -42,6 +42,7 @@
> /*
> * select serial console configuration
> */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL2 1 /* use SERIAL2 */
> #define CONFIG_BAUDRATE 115200
>
> diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
> index 97a4008..2270449 100644
> --- a/include/configs/s5pc210_universal.h
> +++ b/include/configs/s5pc210_universal.h
> @@ -48,6 +48,7 @@
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
>
> /* select serial console configuration */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL2 1 /* use SERIAL 2 */
> #define CONFIG_BAUDRATE 115200
>
> diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
> index a572e62..4631dac 100644
> --- a/include/configs/smdkc100.h
> +++ b/include/configs/smdkc100.h
> @@ -47,6 +47,7 @@
> /*
> * select serial console configuration
> */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL0 1 /* use SERIAL 0 on SMDKC100 */
>
> /* PWM */
> diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
> index 0496661..9e10bf1 100644
> --- a/include/configs/smdkv310.h
> +++ b/include/configs/smdkv310.h
> @@ -48,6 +48,7 @@
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
>
> /* select serial console configuration */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL1 1 /* use SERIAL 1 */
> #define CONFIG_BAUDRATE 115200
> #define EXYNOS4_DEFAULT_UART_OFFSET 0x010000
> diff --git a/include/configs/trats.h b/include/configs/trats.h
> index 9b6aac9..6b301c8 100644
> --- a/include/configs/trats.h
> +++ b/include/configs/trats.h
> @@ -53,6 +53,7 @@
> #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (16 << 20))
>
> /* select serial console configuration */
> +#define CONFIG_S5P_SERIAL
> #define CONFIG_SERIAL2 /* use SERIAL 2 */
> #define CONFIG_BAUDRATE 115200
>
>
Thanks,
Minkyu Kang.
next prev parent reply other threads:[~2013-08-28 10:11 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-21 21:50 [U-Boot] [PATCH] arm:samsung:serial: Extract common Samsung UART code Lukasz Majewski
2013-07-25 21:43 ` [U-Boot] [PATCH v2] arm:samsung:serial Extract common " Lukasz Majewski
2013-08-12 21:15 ` [U-Boot] [PATCH v3 0/3] arm:exynos:cleanup: Extract common code Lukasz Majewski
2013-08-12 21:15 ` [U-Boot] [PATCH v3 1/3] arm:samsung:serial Extract common UART code Lukasz Majewski
2013-08-16 7:16 ` Lukasz Majewski
2013-08-28 10:11 ` Minkyu Kang [this message]
2013-08-28 21:01 ` Lukasz Majewski
2013-09-12 19:43 ` Lukasz Majewski
2013-09-13 2:45 ` Chander Kashyap
2013-09-24 8:42 ` Minkyu Kang
2013-09-24 10:11 ` Lukasz Majewski
2013-08-12 21:15 ` [U-Boot] [PATCH v3 2/3] arm:samsung: Move common code from ./s5p-common to ./samsung-common/ Lukasz Majewski
2013-08-12 21:15 ` [U-Boot] [PATCH v3 3/3] arm:samsung:cpu_info: Rename s5p_* to samsung_* Lukasz Majewski
2013-08-22 10:55 ` [U-Boot] [PATCH v3 0/3] arm:exynos:cleanup: Extract common code Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521DCCD5.1020307@samsung.com \
--to=mk7.kang@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox