From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] i.MX6: nitrogen6x: Use new ANATOP_PFD_X macros
Date: Thu, 29 Aug 2013 12:25:31 -0700 [thread overview]
Message-ID: <521FA02B.8080008@boundarydevices.com> (raw)
In-Reply-To: <1377798352-22204-2-git-send-email-eric.nelson@boundarydevices.com>
On 08/29/2013 10:45 AM, Eric Nelson wrote:
> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> ---
> board/boundary/nitrogen6x/nitrogen6x.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
> index 79ab449..58fe8ae 100644
> --- a/board/boundary/nitrogen6x/nitrogen6x.c
> +++ b/board/boundary/nitrogen6x/nitrogen6x.c
> @@ -634,8 +634,8 @@ static void setup_display(void)
> writel(reg, &mxc_ccm->CCGR3);
>
> /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
> - writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr);
> - writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set);
> + writel(ANATOP_PFD_FRAC_MASK(1), &anatop->pfd_480_clr);
> + writel(0x13<<ANATOP_PFD_FRAC_SHIFT(1), &anatop->pfd_480_set);
>
Nak.
It turns out that PLL3/PFD1 isn't feeding anything in U-Boot on
SABRE Lite or Nitrogen6X so there's no reason to change the value.
prev parent reply other threads:[~2013-08-29 19:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 17:45 [U-Boot] [PATCH 1/2] i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register declarations Eric Nelson
2013-08-29 17:45 ` [U-Boot] [PATCH 2/2] i.MX6: nitrogen6x: Use new ANATOP_PFD_X macros Eric Nelson
2013-08-29 19:25 ` Eric Nelson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=521FA02B.8080008@boundarydevices.com \
--to=eric.nelson@boundarydevices.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox