[U-Boot] [PATCH v2] mmc: don't support write & erase for SPL builds

["Andreas Bießmann" <andreas.devel@googlemail.com>]

Dear Paul Burton,

On 06.09.13 15:43, Paul Burton wrote:
> For SPL builds this is just dead code since we'll only need to read.
> Eliminating it results in a significant size reduction for the SPL
> binary, which may be critical for certain platforms where the binary
> size is highly constrained.
> 
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
> Changes in v2:
>   - Move the mmc_bwrite & mmc_berase functions to a new mmc_write.c
>     file which is only compiled for non-SPL builds, as per a request
>     from Pantelis Antoniou. This requires that a few formerly static
>     functions in mmc.c be accessible to the new file, so they are
>     declared in a new mmc_private.h header along with the write &
>     erase functions. For what it's worth I prefered v1, but hey ho.
> ---
>  drivers/mmc/Makefile      |   2 +
>  drivers/mmc/mmc.c         | 186 +--------------------------------------------
>  drivers/mmc/mmc_private.h |  45 +++++++++++
>  drivers/mmc/mmc_write.c   | 189 ++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 240 insertions(+), 182 deletions(-)
>  create mode 100644 drivers/mmc/mmc_private.h
>  create mode 100644 drivers/mmc/mmc_write.c

<snip>

> diff --git a/drivers/mmc/mmc_write.c b/drivers/mmc/mmc_write.c
> new file mode 100644
> index 0000000..dde5cf2
> --- /dev/null
> +++ b/drivers/mmc/mmc_write.c
> @@ -0,0 +1,189 @@
> +/*
> + * Copyright 2008, Freescale Semiconductor, Inc
> + * Andy Fleming
> + *
> + * Based vaguely on the Linux code
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <config.h>
> +#include <common.h>
> +#include <part.h>
> +#include "mmc_private.h"
> +
> +static ulong mmc_erase_t(struct mmc *mmc, ulong start, lbaint_t blkcnt)
> +{
> +	struct mmc_cmd cmd;
> +	ulong end;
> +	int err, start_cmd, end_cmd;
> +
> +	if (mmc->high_capacity) {
> +		end = start + blkcnt - 1;
> +	} else {
> +		end = (start + blkcnt - 1) * mmc->write_bl_len;
> +		start *= mmc->write_bl_len;
> +	}
> +
> +	if (IS_SD(mmc)) {
> +		start_cmd = SD_CMD_ERASE_WR_BLK_START;
> +		end_cmd = SD_CMD_ERASE_WR_BLK_END;
> +	} else {
> +		start_cmd = MMC_CMD_ERASE_GROUP_START;
> +		end_cmd = MMC_CMD_ERASE_GROUP_END;
> +	}
> +
> +	cmd.cmdidx = start_cmd;
> +	cmd.cmdarg = start;
> +	cmd.resp_type = MMC_RSP_R1;
> +
> +	err = mmc_send_cmd(mmc, &cmd, NULL);
> +	if (err)
> +		goto err_out;
> +
> +	cmd.cmdidx = end_cmd;
> +	cmd.cmdarg = end;
> +
> +	err = mmc_send_cmd(mmc, &cmd, NULL);
> +	if (err)
> +		goto err_out;
> +
> +	cmd.cmdidx = MMC_CMD_ERASE;
> +	cmd.cmdarg = SECURE_ERASE;
> +	cmd.resp_type = MMC_RSP_R1b;
> +
> +	err = mmc_send_cmd(mmc, &cmd, NULL);
> +	if (err)
> +		goto err_out;
> +
> +	return 0;
> +
> +err_out:
> +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
> +	puts("mmc erase failed\n");
> +#endif

this conditional compile in of puts/printf for SPL are no longer
required, I'd prefere to remove them globally in mmc_write.c.

> +	return err;
> +}

Rest of this patch looks good to me.

Best regards

Andreas Bie?mann