* [U-Boot] mxc_i2c: add new i2c subsystem support
@ 2013-09-07 7:41 Philippe Reynes
2013-09-09 5:27 ` Heiko Schocher
0 siblings, 1 reply; 2+ messages in thread
From: Philippe Reynes @ 2013-09-07 7:41 UTC (permalink / raw)
To: u-boot
Hi Heiko,
The mxc_i2c driver use the legacy framework. I plan to
move this driver to new i2c subsystem (CONFIG_SYS_I2C).
Is someone already working on this task ?
If no, I propose to only add new i2c subsystem (and not
remove old i2c framework). We could remove the mxc i2c
legacy support when all the board using this driver will
be updated. What do you think about it ?
Regards,
Philippe
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] mxc_i2c: add new i2c subsystem support
2013-09-07 7:41 [U-Boot] mxc_i2c: add new i2c subsystem support Philippe Reynes
@ 2013-09-09 5:27 ` Heiko Schocher
0 siblings, 0 replies; 2+ messages in thread
From: Heiko Schocher @ 2013-09-09 5:27 UTC (permalink / raw)
To: u-boot
Hello Philippe,
Am 07.09.2013 09:41, schrieb Philippe Reynes:
> Hi Heiko,
>
> The mxc_i2c driver use the legacy framework. I plan to
> move this driver to new i2c subsystem (CONFIG_SYS_I2C).
Great!
> Is someone already working on this task ?
I think not ...
> If no, I propose to only add new i2c subsystem (and not
> remove old i2c framework). We could remove the mxc i2c
> legacy support when all the board using this driver will
> be updated. What do you think about it ?
Hmm.. no ... I prefer a patch which port all boards which use this
driver to the new framework. It should compiles clean. Just add the
board maintainers to cc, so they can test it for you ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-09 5:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-07 7:41 [U-Boot] mxc_i2c: add new i2c subsystem support Philippe Reynes
2013-09-09 5:27 ` Heiko Schocher
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox