From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?UTF-8?B?QW5kcmVhcyBCaWXDn21hbm4=?= <andreas.devel@googlemail.com>
Date: Tue, 10 Sep 2013 11:26:53 +0200
Subject: [U-Boot] [PATCH] Subject: [PATCH v.2] at91: add support for
 CDU9G25 board
In-Reply-To: <522ED13F.90303@aksignal.cz>
References: <1378736524-30870-1-git-send-email-jiri.prchal@aksignal.cz>
	<20130909153431.62F1E380E12@gemini.denx.de>
	<522ED13F.90303@aksignal.cz>
Message-ID: <522EE5DD.5010301@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Ji?? Prchal,

On 09/10/2013 09:58 AM, Ji?? Prchal wrote:
> Dne 9.9.2013 17:34, Wolfgang Denk napsal(a):
>> In message <1378736524-30870-1-git-send-email-jiri.prchal@aksignal.cz>
>> you wrote:

<snip>

>>> +#define CONFIG_BOOTARGS        "console=ttyS0,115200 ubi.mtd=root"\
>>> +                "root=ubi0:root rootfstype=ubifs rw"\
>>> +                "g_ether.dev_addr=02:04:25:aa:55:5e"\
>>> +                "g_ether.host_addr=02:04:25:aa:55:5f"
> This is here for linux connection with PC via USB ethernet gadget. I'd
> like static IP for this connection but if there is random MAC addr I
> must set up IP again and again. Is another solution for this?

I have this in my /etc/network/interfaces on host:

---8<---
allow-hotplug usb0
iface usb0 inet static
	address 192.168.50.2
	netmask 255.255.255.0
	broadcast 192.168.50.255
	network 192.168.50.0
--->8---

And something other, hard coded in in embedded firmware config. This
works like a charm with changing MAC for usb gadget.

Best regards

Andreas Bie?mann