From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 20 Sep 2013 15:43:19 +0200 Subject: [U-Boot] [PATCH] mx6sabresd: Fix the fdt file for the mx6dl version In-Reply-To: <5239AF39.1070008@boundarydevices.com> References: <1379469359-19153-1-git-send-email-festevam@gmail.com> <5239AF39.1070008@boundarydevices.com> Message-ID: <523C50F7.5080706@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Eric, On 18/09/2013 15:48, Eric Nelson wrote: > > This allows the boot script to produce the DTB name as shown > here: > https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript.txt#L72 > > > If/when you move to a single binary for DQ/DL, you won't have > a separate choice as shown above. > > Let me know your thoughts on this. It would be helpful if we agree on a set of common variables (across architectures) to be automatically set by u-boot at the startup. The proposed mechanism is already used in u-boot: see the "dieid#" variable for TI's OMAP. Regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================