From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 20 Sep 2013 18:03:51 +0200 Subject: [U-Boot] [PATCH v2 2/2] mx6sabresd: Reset counter to prevent error message In-Reply-To: <1378934070-11721-2-git-send-email-festevam@gmail.com> References: <1378934070-11721-1-git-send-email-festevam@gmail.com> <1378934070-11721-2-git-send-email-festevam@gmail.com> Message-ID: <523C71E7.1000905@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/09/2013 23:14, Fabio Estevam wrote: > From: Fabio Estevam > > If a HDMI cable is not connected, the following message is seen on boot: > > CPU: Freescale i.MX6Q rev1.1 at 792 MHz > Reset cause: POR > Board: MX6-SabreSD > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > No panel detected: default to HDMI > unsupported panel HDMI > > Reset the 'i' variable to fix the 'unsupported panel' message. > > This follows the same idea of commit 47ac53d7ae (imx: nitrogen6x/mx6qsabrelite: > Fix bug in board_video_skip). > > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx, thanks! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================