[U-Boot] [PATCH] i2c:zynq: I2C multi-bus support on Zynq

[Michal Simek <monstr@monstr.eu>]

>> Tested:
>> Xilinx ZC702 eval board (single bus master 'I2C0' with multiplexer 
>> PCA9548).
>> Write and read registers with addresses of length 0 and 1.
>>
>> Note:
>> Mainline code does not work "out of the box" on ZC702 at this time; ad 
>> hoc adaptations based on 'u-boot-xlnx' repository were needed in order 
>> to test on this board. (Those adapatations are not included with this 
>> patch.)
> 
> ? Where can I find this repository?
> 
> [MRB:] At the following address. (I believe Michal Simek is the person who manages this.)
> 
> http://github.com/Xilinx/u-boot-xlnx/

That's xilinx repo. But you should remove this from commit message.
If there is something wrong in the mainline u-boot initialization
in connection to this you should send patch for it.
As I wrote you in other email we are going to invest our time
to sync configuration from this repo with mainline in the next merge
window because also these changes when they are reviewed
will go to the next u-boot version.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130924/cec6145e/attachment.pgp>